Jus7go Posted September 9, 2017 Share Posted September 9, 2017 Hi Jake , I follow your post and install Series on my E7270 successfully , it works fine , but sleep never wake up again. How can I fix this problem ? i5-6300u 8g 256g 1366*768 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 9, 2017 Moderators Share Posted September 9, 2017 What version of BIOS are you on? Are you using the E7270 Bios v 1.17.5 bootpack? How did you put system to sleep and what happen when you try to wake it up? In my experience after wake, the screen sometimes take a few seconds to appear. If not, you could try typing something and it'll appear. Link to comment Share on other sites More sharing options...
Jus7go Posted September 9, 2017 Author Share Posted September 9, 2017 Thanks for your reply!My bios version is 1.17.5I download E7270 Bios v1.17.5 bootpack, but it takes kernel panic.So I used 7x70 BIOS v1.17.5 bootpack , it works well except wake up.when I fold my laptop the power led status change to slowly blinks and when i open cover the led change to normal, but screen still dark and CapsLock no response. Link to comment Share on other sites More sharing options...
Jus7go Posted September 9, 2017 Author Share Posted September 9, 2017 clover 4184 e7270 v1.17.5 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 9, 2017 Moderators Share Posted September 9, 2017 Boot with the USB installer or the internal drive Go into Options when you see the Clover GUI, use the right arrow to navigate Select ACPI patching-> Tables Dropping-> Go all the way down and deselect Drop all OEM SSDT Check all the Drop "SSDT-xx" below that Select Return Change DSDT name: BIOS.aml Select Return, Return Now back on the main Clover screen, tap F4 on the keyboard Hold Cntrl+Alt+Delete to reboot Clover Boot into OSX Mount the EFI partition (USB installer or internal drive, whatever you used to boot in step 1) Compress and attach /EFI/Clover/ACPI/Origin folder here. I'll patch it for you. Could be a different BIOS setting or hardware you have on your system that's causing this issue. Link to comment Share on other sites More sharing options...
Jus7go Posted September 9, 2017 Author Share Posted September 9, 2017 thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 9, 2017 Moderators Share Posted September 9, 2017 Use the "More Reply Options" on the lower right to attach the file I'm unable to open the link above No need to quote my reply Link to comment Share on other sites More sharing options...
Jus7go Posted September 9, 2017 Author Share Posted September 9, 2017 ok origin.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 9, 2017 Moderators Share Posted September 9, 2017 Here, replace with these files in /EFI/Clover/ACPI/Patched Using the E7x70 v1.17.5 bootpack E7270_sleepFix.zip Link to comment Share on other sites More sharing options...
Jus7go Posted September 9, 2017 Author Share Posted September 9, 2017 WeirdI cleaned up all the files in EFI folders, and reinstalled Clover 4184, then replaced Boot & Clover with EFI_4184.zip and E7x70 bios v1.17.5 , finally put your patched files in /EFI/Clover/ACPI/Patched (also with ssdt.aml)still the same issue Link to comment Share on other sites More sharing options...
Recommended Posts