j4afar Posted June 4, 2018 Share Posted June 4, 2018 Hello guys I am runing osx sierra , I successfully installed bootloader + camera + trackpad + graphics I need your help in order to install audio ALC3234 + ethernet realtek + wifi intel thank you Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 4, 2018 Moderators Share Posted June 4, 2018 Intel Wifi are not supported and will need to be replaced...try DW1560. For audio, use AppleALC.kext + Lilu.kext with layout-id = 3, 13 or 17. Ethernet, try RealtekRTL8111.kext All kexts could be found on the internet. Link to comment Share on other sites More sharing options...
j4afar Posted June 5, 2018 Author Share Posted June 5, 2018 ethernet+graphics what do you mean by layout-id = 3 , 13 or 17 ? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 5, 2018 Moderators Share Posted June 5, 2018 ethernet+graphics??? you're having graphics issue too? what do you mean by layout-id = 3 , 13 or 17 ? I mean, launch Config.plist with Clover Configurator. Under Devices/Audio, change inject value to 3. If you still have audio, change it to 13 and so on.... 1 Link to comment Share on other sites More sharing options...
j4afar Posted June 5, 2018 Author Share Posted June 5, 2018 I fixed the ethernet using RealtekRTL8100.kext,I don't have any issues with the graphics, it works well. Still no sound I did all the steps mentioned above using clover configurator app Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 5, 2018 Moderators Share Posted June 5, 2018 attach your Clover folder for review. Link to comment Share on other sites More sharing options...
j4afar Posted June 5, 2018 Author Share Posted June 5, 2018 I am no longuer able to boot I'll reinstall the sys to get everythings work again and i'll attach my clover thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 5, 2018 Moderators Share Posted June 5, 2018 If you could still boot with the installer, you could select the installed drive at Clover instead of reinstalling. Link to comment Share on other sites More sharing options...
j4afar Posted June 5, 2018 Author Share Posted June 5, 2018 I reinstalled the sys and this were a backup from my EFI , I still not able to boot I don't know why by the way this were fresh backup from the last working clover file :( help please EFI.zip Link to comment Share on other sites More sharing options...
j4afar Posted June 5, 2018 Author Share Posted June 5, 2018 Finally I got the system up and run and here is the working Clover , But I still don't have sound ! hint : ALC3234 :/ help please CLOVER.zip Link to comment Share on other sites More sharing options...
Recommended Posts