Jump to content
Piraterex lk

HP Notebook 15-ab522tx || Intel® Core™ i5-6200U || Sierra

Recommended Posts

Requirements

  1. Pendrive 2.0 (>=8GB)
  2. "Install macOS Sierra app" (https://itunes.apple.com/de/app/macos-sierra/id1127487414?l=en)(Around 5GB)
  3. Working Mac

 

Installing Clover to USB

Get a USB 2.0 Pendrive (8GB and above)

Before you can partition the USB, you must determine what the disk identifier is. With the USB plugged in to the computer, use 'diskutil list':

In Terminal:

diskutil list

In my case, output:

/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage MacOS                   500.4 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s5
   4:       Microsoft Basic Data DATA                    498.8 GB   disk0s4

/dev/disk1 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            Pendrive               *8.0 GB     disk1

As you can see my pendrive is available at /dev/disk1 (check yours).

Now we are going to create partitions, In Terminal:

diskutil partitionDisk /dev/disk1 1 GPT HFS+J "install_macos" R

Output:

Started partitioning on disk1
Unmounting disk
Creating the partition map
Waiting for the disks to reappear
Formatting disk1s2 as Mac OS Extended (Journaled) with name install_osx
Initialized /dev/rdisk1s2 as a 7 GB case-insensitive HFS Plus volume with a 8192k journal
Mounting disk
Finished partitioning on disk1
/dev/disk1 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *8.0 GB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS install_macos           7.7 GB     disk1s2

Now as you can see partitions are created and your pendrive is ready to install clover.

Download the Clover installer. Current builds are available on sourceforge: http://sourceforge.net/projects/cloverefiboot 

After Downloading the Clover installer,

  • Install it to the Target "install_macos" partition  using "Change Install Location".
  • Select "Customize".
  • Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically selected.
  • Check "BGM" from Themes.
  • Check "AptioMemoryFix.efi", "EmuVariableUefi-64.efi", "OsxFatBinaryDrv-64.efi" from Drivers64UEFI.
  • After making your selections, Click "Install".

Finally, one more EFI driver is needed, HFSPlus.efi:

 

Kext Setup

 

Setting config.plist

Download it from the attachments, Unzip and replace EFI/CLOVER/config.plist

 

Building the MacOS Installer

In Terminal : 

sudo "/Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia" --volume  /Volumes/install_macos --applicationpath "/Applications/Install macOS Sierra.app" --nointeraction
sudo diskutil rename "Install macOS Sierra" install_macos

Now your Bootable USB is ready to install. Turn off your Laptop.

 

Installing 

Make sure you have adequate bios settings

 

Then Follow:

  1. Power on laptop with pendrive connected to it. Continuously press "ESC".
  2. Select "Boot From USB" (i.e. F9) and select pendrive from the menu.
  3. Now it boots into Clover, with left-right arrow, select options.
  4. Select "Graphics Injector Menu".
  5. Under "Inject Intel" select "FakeID" and replace "0x00000000" to "0x12345678".
  6. Now return to main screen and select "install_macos".
  7. When grey screen comes, select DiskUtility. Format whole Hard Disk as "Mac Os Extended (Journaled)" with Name as "MacOS"
  8. Now quit DiskUtility and click "Install Mac OS Sierra" and select the newly created partition in previous step.
  9. Now installer will begin installing files (~15-20mins) and the restart.
  10. After restart again boot into clover(Follow Step 1-5) and again select "install_macos".
  11. Now Install screen will appear and continue installation. This time installer will install files to your target partition and create Recovery HD partition. Later on restarts.
  12. After restart again boot into clover(Follow Step 1-5) and again select "MacOS".
  13. If everything goes well, you will finish up the installation process and arrive at the Mac OS Sierra desktop.

 

Install clover to hdd.

Congratulations!! Your Installation is complete!! 

Now you need to fix things one by one.

 

Will Provide fixes when I get time.

  • Like 2

Share this post


Link to post
Share on other sites

×