Jump to content

my installation steps in E6500 nvidia


saphire

Recommended Posts

Dear Mr. Mariusz,

 

I did not change the dsdt.aml from your boot pack e6x00, I found a Dell Optiplex 760 with the same AppleIntelE1000e.kext, and install with Kext Utility, it has more value of ICH9, and it really working in 10.7.2, I also do AppleHDADisabler.kext then install your VoodooHDA,next for IDT sound card, this time, it is not dead.

Your SD, Bluetooth is not working even installation.

 

Here is my sudo dmesg info

 

64 bit mode enabled

Darwin Kernel Version 11.2.0: Tue Aug 9 20:56:15 PDT 2011; root:xnu-1699.24.8~1/RELEASE_I386

vm_page_bootstrap: 997545 free pages and 42839 wired pages

zone leak detection enabled

standard timeslicing quantum is 10000 us

mig_table_max_displ = 73

IntelThermal: Based on code by mercurysquad, superhai ©2008

IntelCPUMonitor: Based on code by mercurysquad, superhai ©2008

AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled

AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled

calling mpo_policy_init for Sandbox

Security policy loaded: Seatbelt sandbox policy (Sandbox)

calling mpo_policy_init for Quarantine

Security policy loaded: Quarantine policy (Quarantine)

calling mpo_policy_init for TMSafetyNet

Security policy loaded: Safety net for Time Machine (TMSafetyNet)

Copyright © 1982, 1986, 1989, 1991, 1993

The Regents of the University of California. All rights reserved.

 

MAC Framework successfully initialized

using 16384 buffer headers and 10240 cluster IO buffer headers

IOAPIC: Version 0x20 Vectors 64:87

ACPI: System State [s0 S3 S4 S5] (S3)

PFM64 (36 cpu) 0xf10000000, 0xf0000000

[ PCI configuration begin ]

PCI configuration changed (bridge=8 device=1 cardbus=1)

[ PCI configuration end, bridges 8 devices 22 ]

FakeSMC: Opensource SMC device emulator by netkas © 2009

FakeSMC: Modified for plugins support by mozodojo © 2010 v3.0

FakeSMC: Idea of FakeSMC plugins and code sample by usr-sse2

FakeSMC: Thanks to slice for help with hardware support code and plugins

FakeSMCDevice: 17 keys added

IntelThermal: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0

IntelThermal: CPU Tjmax 105

IntelCPUMonitor: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0

IntelCPUMonitor: BusClock=252MHz FSB=1008MHz

IntelCPUMonitor: Platform string M82

IntelCPUMonitor: CPU Tjmax 105

mbinit: done [64 MB total pool size, (42/21) split]

Pthread support ABORTS when sync kernel primitives misused

AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete

com.apple.AppleFSCompressionTypeDataless kmod start

PS/2 Mouse init

PS/2 Mouse probe success

PS/2 Mouse startvendor:device: 0x8086:0x10f5.

AppleIntelE1000e(Info): changing MTU from 0 to 1500

com.apple.AppleFSCompressionTypeZlib kmod start

PS/2 Mouse resetPS/2 Mouse start doneFireWire runtime power conservation disabled. (2)

com.apple.AppleFSCompressionTypeDataless load succeeded

com.apple.AppleFSCompressionTypeZlib load succeeded

No interval found for . Using 8000000

AppleIntelCPUPowerManagementClient: ready

FireWire (OHCI) VendorID 1180 ID 832 PCI now active, GUID 334fc000093c0490; max speed s400.

From path: "uuid",

Waiting for boot volume with UUID A51F2E52-8129-3148-8837-B24EEEBC30AA

Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

USBMSC Identifier (non-unique): 20052243031D8B214120 0x781 0x5530 0x100

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/IDE0@1F,2/AppleAHCI/PRI@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SAMSUNG HM120JI Media/IOGUIDPartitionScheme/lion@2

BSD root: disk0s2, major 14, minor 2

DellBluetoothHCI: Version 1.2, by [email protected] <[email protected]>

DellBluetoothHCI: Bluetooth HCI configuration request succeeded for device 413c:8158

AppleIntelE1000e: Ethernet address 00:21:70:b4:df:2c

macx_swapon SUCCESS

Waiting for DSMOS...

Apple16X50PCI3: Identified 1 Serial channels at PCI Bus=0 Dev=3 Func=3

Apple16X50UARTSync3: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

AppleIntelE1000e(Info): Link is Up 100 Mbps Full Duplex, Flow Control: None

Controller: Intel 82801I (vendor ID: 8086, device ID: 293e)

Previous Shutdown Cause: 3

NVDANV50HAL loaded and registered.

AppleUSBCDCWCM: Version number - 4.1.15

AppleUSBCDCACMData: Version number - 4.1.15, Input buffers 8, Output buffers 16

DSMOS has arrived

AppleUSBCDCACMData: Version number - 4.1.15, Input buffers 8, Output buffers 16

AppleUSBCDCDMM: Version number - 4.1.15

AppleUSBCDCDMM: Version number - 4.1.15

0 8 AppleUSBCDCACMData: start - Find CDC driver for ACM data interface failed

0 8 AppleUSBCDCECMData: start - Find CDC driver for ECM data interface failed

0 a AppleUSBCDCACMData: start - Find CDC driver for ACM data interface failed

0 a AppleUSBCDCECMData: start - Find CDC driver for ECM data interface failed

AppleUSBCDC: Version number - 4.1.15

 

 

Anyway, I will try to install the boot loader for direct HDD booting, and hope it will be lucky.

Link to comment
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Sorry, the chemeleon still cannot boot from HDD.

 

USB Pen is hd(0,2) myHack 0SX install disk

HDD is hd(1,) lion

 

So I copy USB pen /Extra folder in the HDD /,

Then retry, ok for boot, how ever, mouse and keyboard integrated cannot work.

 

I connect USB Keyboard and mouse,

 

sudo chmod -R 755 /Extra

sudo chown -R root:wheel /Extra

 

shutdown and boot again, it can boot, but KB/MS same.

 

So use Kext Utility to add the bootpack-e6x00 for AppleACPIPS2Nub.kext & ApplePS2Controller.kext

 

shutdown and boot again, it can boot, but still USB KB and Mouse work only.

 

What is going on ?

 

I cannot believe that boot from USB pen is ok, why boot from HDD is so hard normal.

 

What I use is chemeleon Wizard 4.0.

 

org.chemeleon.Boot.plist choose below:

Quiet boot

Default Partation hd(0,2)

System type 2=laptop

Restart fix

Graphics Enabler

Graphics mode 1024x768x32

 

Then save.

click 1st page Installation, choose the 4th install method, update ...ok.

 

After finally end of booting, it will display 1920x1200x32.

Link to comment
Share on other sites

sorry, I check the USB pen, it is 777 and normal user authority, so I redo normally.

 

By the way, is there some way to change the final display method as 1440x900x32 instead of 1920x1200x32? because fonts is too small to read.

 

I cannot find the display 1440x900x32, or can I change like FreeBSD /etc/Xorg/xorg.conf ?

Link to comment
Share on other sites

today I do reinstall again.

I found the way how to avoid the chemeleon trouble.

 

1. boot from usb pen to install till reboot

of coz, what I use is still Mr. Mariusz's bootpack-e6xx.zip

 

2. boot again from usb pen but not transfer to hdd, entry the terminal under top menu.

cd /Volume/WhatIinstallLion/S/L/E

rm -rf AppleHDA.kext/

reboot now

 

3. boot again from usb pen and transfer continue boot within hdd inside, finish basic lion requirement, I make sure what Mr. Mariusz attached keyboard and mouse works well during the progress, only when lion tell it cannot recognize the keyboard, so connect once usb keyboard and let lion accept, I choose ANSI.

copy the myHack.app from myHack EDP edition and run it, choose Chemeleon+Extra to /, choose generic to finished. Then sudo rm -rf /Extra and sudo cp -r /Extra from the usb pen.

 

4. Reboot and make sure the usb pen is not inserted.

Please be patiend waiting becuase lion will run a longer time to finish the background jobs, I guess it is the cache.

During this period, you can move mouse but no click action and keyboard action, so just wait...

 

5. now Install Dell Optiplex 760's AppleE1000e.kext and so on,

how ever, because no edp for e6500, I still found SB and Bluetooth is not in About Apple.

anyway, sudo dmesg can found bluetooth.

 

I will try to upgrade 10.7.3 soon.

 

And is it Dell 5530 is the WWAN module ?

Link to comment
Share on other sites


×
×
  • Create New...