Jump to content

Install Mojave 10.14.6 on Lenovo ThinkCenter M58p


Recommended Posts

1. What you need?


a) Lenovo ThinkCentre M58p ebay (testet with CPU: E7-Series, E8-Series, Quad-Core-series )

b) Asus NVIDIA GeForce GTX 650 1GB ebay (works with GeForce 710 as well)

c) SanDisk 120GB SSD amazon

d) 8GB USB Stick


MacBook,iMac or Hackintosh

EFI & Kext from olarila

Mojave 10.14 Installer ( Download from Store or ISO from somewhere else and copy it into /Application)



Clover Pack for ThinkCenter m58p

2. Create USB-Installer Mojave 10.14

You have several possibilities to install Mojave 10.14.6 on MBR-Disk. In case you want to install Mojave on HFS+, you will need to create an USB stick with this patch from insanelymac

a) Create MBR USB-Stick with Mojave

sudo /Applications/Install\ macOS\ Mojave\ Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/USB

b) Run Clover and select:

[x] Install Clover in ESP

- Bootloader

    [x] Install boot0af in the MBR (see attachment)


the rest will be selected automatically

After Clover is installed an EFI-Partition will created and mounted

c) Open the EFI-Partition and replace the EFI-Folder with the https://gofile.io/?c=WKacvH  


3. Install Mojave on Lenovo

a) BIOS-Setup: AHCI should be enabled

b) Run Install Mojave from USB-Stick created above

c) Follow the installation until the end, then you will need to replace the following file with one from HighSierra (otherwise you will get kernel panic)



4. Update to 10.14.6

a) Download the 10.14.6 Combo Update from the Apple Homepage

b) Install it and reboot


5. Works

Graphics (full acceleration; I am using 3 monitors)

Sounds (thx to VoodooHDA all works very well)



6. What needs improvement and I will need some help from you guys:

+ Shutdown

+ Restart

+ I dont use an DSDT ( dont know if we need to patch that )

+ SSDT most probably if possible




  • Like 1
Link to comment
Share on other sites


  • Create New...