N5321gw and MU736 WWAN modules: supported?

[Handicap88]

 I got this two models, and hope finally one will work.. I have modified CellPhoneHelper.kext according to the instructions. Detects WWAN card, but unfortunately I cannot connect to network (AERO2). Works fine on Windows. I've tried almost everything.

 

 

 

 

Sun Nov  1 11:01:11 2020 : publish_entry SCDSet() failed: Success!
Sun Nov  1 11:01:11 2020 : publish_entry SCDSet() failed: Success!
Sun Nov  1 11:01:12 2020 : Apple Base Script.ccl Version 3.3
Sun Nov  1 11:01:12 2020 : CCLWrite : AT\13
Sun Nov  1 11:01:12 2020 : CCLMatched : OK\13\10
Sun Nov  1 11:01:12 2020 : Initializing device: AT&FE0Q0V1
Sun Nov  1 11:01:12 2020 : CCLWrite : AT&FE0Q0V1\13
Sun Nov  1 11:01:12 2020 : CCLMatched : OK\13\10
Sun Nov  1 11:01:12 2020 : Initializing PDP context: AT+CGDCONT=1,"IP","darmowy"
Sun Nov  1 11:01:12 2020 : CCLWrite : AT+CGDCONT=1,"IP","darmowy"\13
Sun Nov  1 11:01:12 2020 : CCLMatched : OK\13\10
Sun Nov  1 11:01:12 2020 : Dialing: ATD*99***1#
Sun Nov  1 11:01:12 2020 : CCLWrite : ATD*99***1#\13
Sun Nov  1 11:01:12 2020 : Waiting for connection
Sun Nov  1 11:01:13 2020 : CCLMatched : CONNECT\13\10
Sun Nov  1 11:01:13 2020 : Connection established
Sun Nov  1 11:01:16 2020 : CCLExit: 0
Sun Nov  1 11:01:16 2020 : Serial connection established.
Sun Nov  1 11:01:16 2020 : using link 0
Sun Nov  1 11:01:16 2020 : Using interface ppp0
Sun Nov  1 11:01:16 2020 : Connect: ppp0 <--> /dev/cu.wwan
Sun Nov  1 11:01:17 2020 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5c1512c0> <pcomp> <accomp>]
Sun Nov  1 11:01:17 2020 : rcvd [LCP ConfReq id=0x3 <auth chap MD5> <accomp> <pcomp> <mru 1500> <asyncmap 0x0> <magic 0x8ff79742>]
Sun Nov  1 11:01:17 2020 : No auth is possible
Sun Nov  1 11:01:17 2020 : lcp_reqci: returning CONFREJ.
Sun Nov  1 11:01:17 2020 : sent [LCP ConfRej id=0x3 <auth chap MD5>]
Sun Nov  1 11:01:17 2020 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x5c1512c0> <pcomp> <accomp>]
Sun Nov  1 11:01:17 2020 : rcvd [LCP ConfReq id=0x4 <accomp> <pcomp> <mru 1500> <asyncmap 0x0> <magic 0x8ff79742>]
Sun Nov  1 11:01:17 2020 : lcp_reqci: returning CONFACK.
Sun Nov  1 11:01:17 2020 : sent [LCP ConfAck id=0x4 <accomp> <pcomp> <mru 1500> <asyncmap 0x0> <magic 0x8ff79742>]
Sun Nov  1 11:01:17 2020 : sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Sun Nov  1 11:01:17 2020 : sent [IPV6CP ConfReq id=0x1 <addr fe80::2ad2:44ff:fe6c:d20d>]
Sun Nov  1 11:01:17 2020 : rcvd [LCP ProtRej id=0x1 80 57 01 01 00 0e 01 0a 2a d2 44 ff fe 6c d2 0d]
Sun Nov  1 11:01:17 2020 : rcvd [LCP TermReq id=0x1]
Sun Nov  1 11:01:17 2020 : LCP terminated by peer
Sun Nov  1 11:01:17 2020 : sent [LCP TermAck id=0x1]
Sun Nov  1 11:01:20 2020 : Connection terminated.
Sun Nov  1 11:01:21 2020 : CCLWrite : +++
Sun Nov  1 11:01:29 2020 : CCLWrite : ATH\13
Sun Nov  1 11:01:29 2020 : CCLMatched : OK\13\10
Sun Nov  1 11:01:30 2020 : CCLWrite : AT&F\13
Sun Nov  1 11:01:30 2020 : CCLMatched : OK\13\10
Sun Nov  1 11:01:30 2020 : CCLExit: 0
Sun Nov  1 11:01:30 2020 : Serial link disconnected.

 

[Bronxteck]

did you set PPP? last tab on your first picture

[Handicap88]

@Bronxteck Sorry for delay.. I tried Huawei MU736, but no luck. It's visible only as USB device.. Now I switched back to SonyEricsson, and can answer.. Yes I checked PPP option. It makes no difference.