dm4n Posted April 2, 2013 Author Share Posted April 2, 2013 10.8.3 Update: Downloaded the Combo update from Apple (instead of via appstore) Ran myHack before Restart. Didn't replace any kexts in S/L/E Also, I connected new Crossover 30" WQHD monitor. Everything works oob- monitor and resolution (2560*1600) recognised in System information. Still have to add ATI 5670 as the video card in System Properties. Cheers and Good Hack Link to comment Share on other sites More sharing options...
dm4n Posted June 16, 2013 Author Share Posted June 16, 2013 10.8.4 Update Downloaded and installed Combo Update from Apple. Had previously installed latest Voodoo HDA 2.8.2 with Sys. Prefpane All working well Link to comment Share on other sites More sharing options...
rayzedge Posted July 19, 2013 Share Posted July 19, 2013 Hello, just recently found one of these laying around figured i'd give it a try too. I got everything working beside wake from sleep, does not wake from keyboard or mouse only from powerbutton and even then take awhile before there video output like 2.5 mins. Any help would be much appreciated. System: c2q 2GB RAM nVidia gt 520 1GB card. Install: Restore base system method and copying package from appstore download. install with: AppleIntelE1000ePatched AppleIntelCPUPowerManagementGraphicsEnabler=No Link to comment Share on other sites More sharing options...
dm4n Posted July 30, 2013 Author Share Posted July 30, 2013 Hi rayzedge, Congratulations on getting the 755 working as a hackintosh! My machine does wake from 'sleep' using keyboard and mouse. But I use the term 'sleep' in a qualifited sense since I can stil hear fans and possibly HD's whirring. Pretty sure that the machine sleeps more fully when booted into Windows. I don't have option darkwake=0 checked on my smbios.plist using Chameleon Wizard. Nor do I have the patched AppleIntelCPUPowerManagement kext in s/l/e. Make sure you don't have NullCPUPowerManagement kext installed in Extras folder. Good luck! Link to comment Share on other sites More sharing options...
rayzedge Posted July 30, 2013 Share Posted July 30, 2013 Thanks for the suggestions, I tried this previously with no success, guess I've just have to invoke a longer wait before sleep and shutdown when i'm done. Link to comment Share on other sites More sharing options...
dm4n Posted November 6, 2013 Author Share Posted November 6, 2013 Update: OS 10.9 Mavericks working. Here's my method which may/may not be optimal. Your mileage may vary. Method: for installing Used myHack 3.3 to create a 10.9 usb installer. Copied 3 kexts from S/L/E on the usb to desktop: IOPCIFamily.kext, IOAHCIFamily.kext, AppleAHCIPort.kext Substituted the following kexts from existing 10.8.5 install IOPCIFamily.kext, IOAHCIFamily.kext, AppleAHCIPort.kext onto the usb (use a kext utility) as per here. disconnected other HD's, check BIOS set to AHCI, set boot sequence to boot from usb and installed 10.9. Method for booting: Replaced IOPCIFamily.kext and IOAHCIFamily.kext (with the 10.9 kexts previously saved to desktop) in S/L/E of the Mavericks install. Note that the ML 10.8.5 AppleAHCIPort.kext left in place. Run myHack fix permissions etc. Reboot. Good luck! Link to comment Share on other sites More sharing options...
Recommended Posts