dalocnar Posted August 10, 2013 Share Posted August 10, 2013 i tried to follow the tutorial, but i keep getting appleintelcpupowermanagement kernel panic when booting -v, so i installed nullcpupowermanagement kext... and it just sits there... any suggestions or help on trying this? i would like to possibly run it on my hackintosh.. I have tried to use cpus=1, cpus=2 and still nothing....thanx in advance.. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 10, 2013 Administrators Share Posted August 10, 2013 Hi, what's in your /Extra folder? Did you try boot options such as npci=0x2000 or PciRoot=1 or -x ? This laptop runs on GMA X3100 graphics which is not supported by ML. As such, you have no native graphics support, except if you apply MLPF hack on that installation. You can have a look for details in the various guides I've published in the relevant section, especially those for D630 X3100 and D620 nVidia. Link to comment Share on other sites More sharing options...
dalocnar Posted August 10, 2013 Author Share Posted August 10, 2013 i was trying to use them but i couldnt get past the installer screen.... i was using the low res pack (tried the high res also) for the d630 tutorial. if i run as the tutorial says i get a kp for appleintelpowermanagement. if i install nullcpupowermanagement it never goes past the screen above.... Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 10, 2013 Administrators Share Posted August 10, 2013 Try and use the /Extra from your previous Lion installation as boot pack. I would not use the DSDT of a given computer on another one, unless it is really identical hardware wise; this is not entirely the case between D630 and Inspiron 1525. Link to comment Share on other sites More sharing options...
dalocnar Posted August 11, 2013 Author Share Posted August 11, 2013 is there a easy way to generate a dsdt file for my pc? also i noticed in all the tutorials for installing mountain lion on the d630 (with gma x3100) that none of them says what switches to use (because i would assume it was throw the same kps as mine) Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 11, 2013 Administrators Share Posted August 11, 2013 You can extract your DSDT with Chameleon Wizard, if you do not already use one. You can also use DSDTEditor too (available off Olaria forum) or follow the process detailed by Dinesh in his DSDT/SSDT thread in Research section of the forum. Link to comment Share on other sites More sharing options...
dalocnar Posted August 12, 2013 Author Share Posted August 12, 2013 can a dsdt made within lion be used on mountain lion? Link to comment Share on other sites More sharing options...
dalocnar Posted August 12, 2013 Author Share Posted August 12, 2013 when i get this working i will post how/what i did for my model... Link to comment Share on other sites More sharing options...
dalocnar Posted August 12, 2013 Author Share Posted August 12, 2013 i got ML to boot after making my own dsdt file... wireless and ethernet not working.. may need help with this again.. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 12, 2013 Administrators Share Posted August 12, 2013 Can you list the hardware specifications? I know the Inspiron 1525 has a Broadcom LAN, but it's different from the D630's. For wireless, you need a supported model, which may or may not need a kext; have a look at the non-exhaustive inventory in Research->Hardware->Network section of the forum. Link to comment Share on other sites More sharing options...
Recommended Posts