Moderators Jake Lo Posted November 2, 2013 Moderators Share Posted November 2, 2013 Specs: BIOS A13 | i7-3720QM 2.6Ghz | 8GB DDR3 | nvs5200M/HD 4000 1600x900 | 256GB SSD | Rebranded Dell DW1510 | Mountain Lion 10.8.5 | Mavericks GM Credits: Special thanks to Conti for myHack EMlyDinEsH for the patched DSDT/SSDT and AppleHDA Zenith432 for USB 3.0 qwerty12 for DisableIntelTurboBoost for Battery Power Developers of Chameleon What's working: Full QE/CI Keyboard and mouse (no multitouch) - For multitouch, check this Keyboard Backlit Audio HDMI video & audio Wifi - replaced Intel Card with DW1510 (rebranded) LAN USB 3.0 Webcam Before we start- Set BIOS to Default, then go back and change Sata Operation to AHCI and Disable Optimus in Video Let's get started... I use the myhack method for this build, so follow instructions to build your USB installer, set BIOS settings and run the OSX Installation from here http://myhack.sojugarden.com/guide/ After creating your USB installer, run myHack again Select Install Extra and point to the Extra folder attached (extract it first) Extra_ML.zip Boot up system with USB installer disk with the -v switch (use USB 2.0 port on the left or the eSata port, USB 3.0 ports don't always work) Format the HDD per instruction from myHack (GPT and Journaled) Select "Use my Own" when prompt and point to the Extra folder in the root of the USB installer drive Delete the (3) files when prompted If you get an Install Failed error towards the end, that's fine, restart the computer. Remove the USB installer drive Complete the Installation ( if you get Invalid Partition Table during boot - just hit enter to continue - you'll find fix below) Install 10.8.5 Combopack Notes: For Mavericks, use this bootpack and rename it to Extra Extra_Mav.zip Replace SSDT in Extra if you have an i7-3740QM SSDT_i7-3740QM.zip I'm using version 10.8.4 for the build and then upgrade to 10.8.5 combo pack and supplemental update Sleep does not work, so make sure to turn it off otherwise you'll have to hard shutdown/reboot system Fixes: If you encounter "Invalid Partition Table" after the first reboot, just hit the Enter key to continue. To completely remove that error, launch myHack and select Install Chameleon If you encounter error above when playing a DVD movie the first time, replace DVDPlayback.framework.zip 2.86MB 13 downloads in System/Library/Frameworks. Don't forget to backup yours first. JL 3 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 19, 2014 Author Moderators Share Posted September 19, 2014 Updates NOTE: See guide here to enable Optimus and gain sleep capability Mavericks Update 10.9.5 STATUS: GOOD UPDATE METHOD: APP STORE/SYSTEM UPDATE MODIFICATIONS NEEDED: Get new boot pack here add to org.chameleon.boot.plist DSDT/Extra/DSDT.amlHDAEnabler Yes 1 Link to comment Share on other sites More sharing options...
Recommended Posts