Jump to content
Jake Lo

Optiplex 9020 - Mavericks / El Capitan / Sierra (WIP)

Recommended Posts

optiplex9010.png
 
UPDATE: For Yosemite / El Capitan / Sierra with Clover Guide, see post #3 below!!!
 

Mavericks Guide with myHack (Chameleon)

 

Specs:

i7 - 4770 3.4GHz| 8GB ram | HD4600 | 128GB SSD | Mavericks 10.9 GM| BIOS A05

 

Work in Progress!

  1. Build USB Installer with myHack
  2. Download and Extract bootpack Extra.zip
  3. Relaunch myHack, select Install Extra, select USB Installer as target drive. Select "Use my Own" and browse to Extra above
  4. Boot with USB Installer ( Make sure to plug monitor to displayport, use bottom DP if you only have 1 monitor) 
  5. Format disk to GUID and Extended Journal and start the build 
  6. When prompt, select "Use My Own" and point to Extra on USB Installer
  7. Select Yes 3 times to delete issue kexts
  8. Wait a few minutes, system will automatically reboot
  9. Complete the install

 

Working:

  • HD 4600 Full QE/CI
  • USB 3.0 ( not tested for speed)
  • Dual display is working with the 2 built-in DisplayPort 
  • Sleep / Shutdown / Reboot with Dual monitor working using either DP monitors or active DP/DVI adapter ( thanks to ktbos' exhaustive testing)

WIP (Not working)

  • Sleep works but on resume, black screen fixed - add -gux_defer_usb2 to org.chameleon.Boot.plist
  • Sleep with Dual monitor connected with passive DVI to DP adapter
  • Built-in Speaker / Headphone jack - loud pitch noise fixed thanks to ktbos - get boot pack under updates below

 

Note: Make sure to set SATA Operation to AHCI. For best result, set it to the Default, apply and then set SATA Operation to AHCI.

Make sure to remove external video card or disable it in the BIOS.

  • Like 3

Share this post


Link to post
Share on other sites

Updates

 

 

  • Mavericks Update 10.9.4

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

Use latest bootpack

Set Hibernatemode to 3 (thanks to ktbos -fixes display after wake from sleep)

Fixes: 

Fix audio issue

Extra.zip

 

  • Mavericks Update 10.9.5

STATUS:

GOOD

UPDATE METHOD:

APP STORE/SYSTEM UPDATE

MODIFICATIONS NEEDED:

Replaced patched kernel in /Extra before rebooting

zip.gif  mach_kernel_1095.zip

  • Like 1

Share this post


Link to post
Share on other sites

Clover Guide

 

BIOS:

 

Set to Load Default, apply, then set Boot List Option to UEFI, SATA Operations to AHCI, Enable Legacy Option ROMs

 

Follow my Clover guide 

Use this bootpack (latest Bios vA20)

Optiplex9020_A20.zip

 

Bios vA22

Optiplex9020_HS_A22.zip (High Sierra ready but sleep is broken)

 

Working:

  • HD 4600 Full QE/CI
  • HDMI Video / Audio
  • Sleep / Wake
  • USB 3.0 ( not tested for speed)
  • Dual display is working with the 2 built-in DisplayPort 
  • Headphone / External Mic

 

Not Working:

  • Rear Headphone jack

 

  • Like 4

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...