lian li Posted May 26, 2014 Share Posted May 26, 2014 hi folks, i installed 0sx 10.7.5 on my dell 820 intel graphics. look at the boot table, there are several smc errors which might cause the problem with my monitor its getting softed a little bit kind of darken. what can i do now? 1,83 core duo 4 gb ram snc version 1.30f3 i tried to change it with playlist as shown in your documentation. doesnt work, whats going wrong? i installed edp extra with my model issuesm 820 intel etc … but when im looking for my model: it is late 2006 mac book which is older version than edp is installing. i dont know now what is the right way to go to fix the smc errors. by the way sleep enabler is possible on this machine? npvhash=4095 PAE enabled 64 bit mode enabled Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386 vm_page_bootstrap: 831378 free pages and 20590 wired pages zone leak detection enabled standard timeslicing quantum is 10000 us mig_table_max_displ = 73 Refusing new kext com.apple.driver.AppleRTC, v1.5: already have prelinked v1111.0. Refusing new kext com.apple.driver.AppleACPIButtons, v1.5: already have prelinked v1111.0. Refusing new kext com.apple.driver.AppleACPIPlatform, v1.5: already have prelinked v1111.0. [sleepEnabler] Registering PowerManagement dispatch table with PM_DISPATCH_VERSION 102... [sleepEnabler] To disable (if the kernel panics), please specify the boot argument pmVersion=0 [sleepEnabler] Calling pmInitComplete()... NullCPUPowerManagement::init: properties=0x5c17fc0 IntelCPUMonitor: Based on code by mercurysquad, superhai ©2008 User defined TjMax=0 NullCPUPowerManagement::start AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers Unsynchronized TSC for cpu 1: 0x00000005a466481c, delta 0xf196bd86 Current tsc from rdtsc64() is 20183858266. Rendezvouing.. VoodooTSCSyn::doTsc(): stamp_tsc was called: 2 times IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf10000000, 0xf0000000 [ PCI configuration begin ] PCI configuration changed (bridge=4 device=2 cardbus=1) [ PCI configuration end, bridges 7 devices 15 ] RTC: Only single RAM bank (128 bytes) IntelCPUMonitor: CPU family 0x6, model 0xf, stepping 0x6, cores 2, threads 2 IntelCPUMonitor: Using efi IntelCPUMonitor: BusClock=166MHz FSB=665MHz IntelCPUMonitor: Platform string M75 IntelCPUMonitor: CPU Tjmax 80 mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused FireWire runtime power conservation disabled. (2) com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded BTCOEXIST off wl0: Broadcom BCM4328 802.11 Wireless Controller 5.10.131.36 ApplePS2Controller: Timed out on mouse input stream at readDataPort. rooting via boot-uuid from /chosen: D5174995-6BD1-3FAC-AB07-AEB5EC7DAF4F From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 324fc000327ce850; max speed s400. Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci8086,27c4@1F,2/AppleIntelPIIXATARoot/CHN0@0/AppleIntelICHxSATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/KINGSTON SV300S37A60G KINGSTON SV300S37A60G/IOGUIDPartitionScheme/Ohne Titel@2 BSD root: disk1s2, major 14, minor 5 ApplePS2Controller: Timed out on mouse input stream at readDataPort. VoodooPS2SynapticsTouchPad loaded ApplePS2Controller: Timed out on keyboard input stream (expected). [iOBluetoothHCIController::setConfigState] calling registerService ApplePS2Controller: Timed out on mouse input stream (expected). ApplePS2Controller: Timed out on mouse input stream (expected). ApplePS2Controller: Timed out on mouse input stream (expected). No interval found for . Using 8000000 ApplePS2Trackpad: ALPS GlidePoint v0.0 BCM5751Enet: Ethernet address 00:00:00:00:00:00 AirPort_Brcm43224: Ethernet address 00:1a:73:fb:24:29 IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification IO80211Interface::efiNVRAMPublished(): ** AppleSMBusPCI::start failed to get acpi path for provider Controller: Intel 82801G (vendor ID: 8086, device ID: 27d8) SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0 Previous Shutdown Cause: 3 SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode Apple16X50ACPI0: Identified Serial Port on ACPI Device=UAR1 Apple16X50UARTSync0: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 DSMOS has arrived VoodooBattery 1.3 © 2008-10 Superhai, All Rights Reserved. May 5 2010 09:53:02 32 bit AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). macx_swapon SUCCESS ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out VoodooPState.kext: VoodooPState.kext 1.0.0 (Release) May 7 2010 21:55:06 [1060] VoodooPState.kext: based on VoodooPower 1.2.3. ACPI_SMC_PlatformPlugin::registerLPCDriver - WARNING - LPC device initialization failed: C-state power management not initialized VID2: Not usable Auth result for: 00:24:fe:a8:31:f6 MAC AUTH succeeded AirPort: Link Up on en1 en1: BSSID changed to 00:24:fe:a8:31:f6 AirPort: RSN handshake complete on en1 AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving). E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed (kIOReturnNotResponding) [AppleUSBHCIController][ClearFeatureInterruptEndpointHalt] - ClearPipeStall returned e00002ed [iOBluetoothHCIController::setConfigState] calling registerService Auth result for: 00:24:fe:a8:31:f6 MAC AUTH succeeded AirPort: Link Up on en1 en1: BSSID changed to 00:24:fe:a8:31:f6 AirPort: RSN handshake complete on en1 ths-MacBook:~ /Extra/EDP/bin/launchEDP.command ; exit; ths-MacBook:$ anybody out there, who could help? live long and prosper! thomas Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 27, 2014 Administrators Share Posted May 27, 2014 Do as per all other GMA 950-based D Series: apply the brightness fix that is found in EDP or place attached kext in /E/E, apply myFix (quick) and reboot. AppleIntelIntegratedFramebuffer.kext.zip Link to comment Share on other sites More sharing options...
lian li Posted June 5, 2014 Author Share Posted June 5, 2014 It works fine thanks a lot . Admin. POssible to get sleep enabler working on this machine? with fake smc kext i get the terminal boot log signed in red above solved? possible to emulate this static smc error problem? best regards thomas Link to comment Share on other sites More sharing options...
Administrators Hervé Posted June 5, 2014 Administrators Share Posted June 5, 2014 Configure your D820 in the same way as a D620 and you'll find everything works fine. It's all explained in various thread in the D6xx/D8xx section of the forum. Don't hesitate to use the Search facility. Link to comment Share on other sites More sharing options...
Recommended Posts