Jump to content
Jake Lo

Gigabyte GB-BXi7-4770R - Yosemite / El Capitan / Sierra / High Sierra / Mojave with Clover

Recommended Posts

GB-BXi7-4770R.jpgGB-BXi7-4770R-3.jpgGB-BXi7-4770R-2.jpg

GB-BXi7-4770R-4.jpgGB-BXi7-4770R-5.jpg

 

i7 - 4770R 3.2GHz (3.9GHz Turbo)| 8GB ram | HD 5200 | 128GB SSD | Yosemite 10.10.5 | El Capitan 10.11| BIOS F5

BIOS Settings: Set SATA to AHCI / Disable Secure Boot / Disable CFG Lock (under Advanced/CPU Configuration) / UEFI

 

Specs: 

  • Intel 4th generation Core i7-4770R processor
  • Intel Iris Pro graphics 5200 w/ 128MB of EDRAM or embedded ram
  • Supports 2.5 thickness 7.0/9.5mm Hard Drives (1 x 6Gbps SATA3)
  • Ultra compact PC design 0.79L (62 x 111.4 x 114.4 mm)
  • 1 x mSATA SSD Slot
  • 2 x SO-DIMM DDR3L Slots (1333 / 1600 MHz)
  • IEEE 802.11 a/b/g/n/ac Wi-Fi / Bluetooth 4.0 Mini-PCIe card
  • HDMI plus Mini DisplayPort Outputs (supports dual displays)
  • 4K resolution output (4096 x 2304 via HDMI)
  • 4 x USB 3.0
  • Gigabit LAN
  • Headphone jack with S/PDIF
  • VESA mounting bracket (75 x 75mm + 100 x 100mm)

 

Working:

  • Intel Iris Pro HD 5200 Full QE/CI
  • Dual Display (HDMI & minDP)
  • Sleep/Shutdown/Restart
  • Ethernet
  • USB 3.0 
  • Wireless ( must be replaced with a supported card)
  • Headphone / HDMI Audio using AppleHDA

Recently got a hold of a Gigabyte GB-BX-i7-4770R. Cool little box and thought why not hack it with OS X.

Steps:
  1. Follow the standard UEFI Clover guide
  2. Place SSDT.aml in EFI/Clover/ACPI/Patched (attached below)
  3. Remove all folders in EFI/Clover/Kexts, place Other here (attached below)
  4. This should get you to the installer and complete the build
  5. Once logged in, install EFI/Clover/Kexts/AppleHDA_ALC269.kext to /S/L/E with kextwizard
  6. You should now have a fully running OS X
 

Credits:

Toleda - SSDT and patched AppleHDA

 

GB-BXi7-4770R.zip

  • Like 2

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...