RobertB Posted January 18, 2011 Share Posted January 18, 2011 Hi, I'm new on this forum but great to see that there is one place to talk about the Latitude series of Dell. I own a D610 working nicely with 10.5.8. Now I like to know if it would be possible to update it to Snow Leopard or is the D610 to old for that? If one of you could give me some pointers where to start. Looking forward to see comments. regards, Robert Link to comment Share on other sites More sharing options...
Administrators Leon Posted January 19, 2011 Administrators Share Posted January 19, 2011 Hey Robert, It very much depends on your specs. Reading your specs here: http://en.wikipedia.org/wiki/Dell_Latitude i would say.. give it a go .. and if it works.. let us know so that we can get the EDP optimized for your machine also... Link to comment Share on other sites More sharing options...
RobertB Posted January 19, 2011 Author Share Posted January 19, 2011 Hey Robert, It very much depends on your specs. Reading your specs here: http://en.wikipedia.org/wiki/Dell_Latitude i would say.. give it a go .. and if it works.. let us know so that we can get the EDP optimized for your machine also... Leon, thanks for your replay. Do you have a advise how to proceed? Do I use the installation instruction of this Forum? Link to comment Share on other sites More sharing options...
Administrators Leon Posted January 19, 2011 Administrators Share Posted January 19, 2011 Goto the Wiki.. its all there Link to comment Share on other sites More sharing options...
RobertB Posted January 19, 2011 Author Share Posted January 19, 2011 Goto the Wiki.. its all there I copied 10.6 retail to a USB drive. Installed a bootloader as well. At the start of the bios I hit F12 to select the system to start from the USB drive. Cameleon start and I can select from the USB the 10.6 install. Cameleon starts after the enter and with in 2 seconds I get a panic and have to restart the D610 again. Al my other systems I use the IPC disk or the iFail disk. Is there something I need to do to make it work? Link to comment Share on other sites More sharing options...
RobertB Posted January 24, 2011 Author Share Posted January 24, 2011 I copied 10.6 retail to a USB drive. Installed a bootloader as well. At the start of the bios I hit F12 to select the system to start from the USB drive. Cameleon start and I can select from the USB the 10.6 install. Cameleon starts after the enter and with in 2 seconds I get a panic and have to restart the D610 again. Al my other systems I use the IPC disk or the iFail disk. Is there something I need to do to make it work? Hi, Does one of you has a sugestion for this or is the D610 single core system simply not right for 10.6? thanks, Link to comment Share on other sites More sharing options...
Recommended Posts