Tricchi

I have a Dell e6530 with i5 HD4000 iGPU 8gb ram Bios A13 and now that I've replaced the wifi card with Broadcom BCM43224HMS me it works very well even wifi. I practically all works: - Ethernet - Wifi - Bluetooth - USB 3 - HDMI - Audio - SD Cards - Graphics card and monitor - IMessage, Facetime, Airdrop, Handoff (partially) If you want I can send my DSDT.aml and /Clover/Kext/10.12 folder where there are kext I used. I used the Clover r3974 version.

In particular, what should I look in the config? Can you give me some concrete advice?

I inserted the patch indicated by Jake. Now handoff from a hack to iphone works well as before (always after switching off and reactivated handoff and bluetooth), whereas from iPhone to hack appears for example Safari's icon but when I click it does not continue in the loading page. The same thing happens with all the other compatible applications.

My SMBIOS is MBP9,1. My router has wifi 2.4 and 5 GHz. But I checked that for example at the moment is the hack that the iphone is a 5 GHz, but does not work anyway. Currently I have enabled the initial patch IoBluetoothFamily (the one I sent you in the config earlier this topic). Do You think it's better to put another patch that I have shown you https://osxlatitude.com/index.php?/topic/9523-handoff-in-only-one-direction/?p=66673?In this case it is best to first rebuild the cache with the commands that you have shown me?

For example, if I open Safari on iPhone I should see the icon on the left of the Mac dock (hack) and does not appear. And so with all the other compatible applications. As if I do the same thing starting from the hack on the iPhone icon appears by double-clicking the home button.

Ok, now it works again. Maybe something was wrong. I rebuilt the cache with Dcpimanager. It always works only in one direction, but it works!

Exscuse my ignorance: how do I rebuild the cache? I tried it with kext utility v. 2.6.6 but it did not work.

It's a mistery. Suddenly no longer it worked. Only works Airdrop.

I changed the config with Clover Configurator.

I tried to replace the previous ones and now it no longer works at all. Even putting the ones you've shown me no longer works. I tried to turn off bluetooth and turn it back I tried to disable handoff and to reactivate it. But no longer works. What may have happened?

I also tried with these but the behavior is the same.

Wi-fi Broadcom BCM943224HMS (I put this because the original card is not compatible) and Bluetooth is BCM20702A0

Handoff and Continuity work only from my Dell E6530 to Iphone/Ipad and not the other way. From Hack to Iphone/Ipad it works completely after putting in config the following patches http://www.insanelymac.com/forum/topic/302410-patch-enabling-handoff-for-non-apple-bt4-devices/?p=2082560. The patch is related to IOBluetoothFamily. Is there a way to make it work well even by Iphone/Ipad to Dell (hack)? I am attaching my current config. Thanks config.plist.zip

In the end I managed to solve the problem by changing the BIOS mode from Legacy to UEFI. At this point it disappeared the message "invalid partition table!" and everything has started regularly. Thanks for all and best wishes for the New Year 2017!!

What kind of command I might try using the terminal to see which the problem and possibly fix it without data loss?

How would I go to see this? What do you recommend I do?

No, I think that was the beginning formatted partition GUID.

I installed the 3961 version.

I completed the Sierra installation on my Dell e6530 thanks to your help in the previous post. But at every start I always the error "invalid partition table!" and pressing Enter will start correctly. How can I eliminate that mistake? I found some suggestions in that link https://osxlatitude.com/index.php?/topic/5660-dell-latitude-e6430e6530-with-nvs5200m-hd4000/?p=29476but we are talking about Chamelon and instead I used Clover. How can I fix?

Thanks. I added in the config enabled patch and now HDMI works. Yes, I am using AplleHDA kext.

Here are my DSDT + Config. Thanks. DSDT + Config.plist.zip

Now USB3 work but I would try to operate the HDMI port. You can help me?

I send you the screen of the USB ports. I send also EFI zipped. Thanks. EFI.zip

I have set the boot in Legacy. Do you think it necessary to set the boot UEFI?

I installed macos Sierra on my Dell E6530 with Clover latest version. The version of the BIOS is A13. It works all but the USB ports 3. I also recognized the bluetooth but the USB ports are 2.0. I used the kext usbinjectall over the FakeSNC and others that I can not remember. In config I tried to enable all options in USB Devices but nothing has changed. You can help me? Thank you all.