mikevinci

Hello, I have verified that the kext of PS2 that you indicate to me is correct, the truth I do not know exactly why it happens. I wanted to try to do another clean installation in another HDD to do tests, and I check that when I install version 10.12.3 I have no problems but when I update it to 10.12.5 it stops working. Maybe something I do not do well. At the moment and until I can devote some more time to this matter I think I'll leave it with version 10.12.3 for the Dell E6420 laptop. However I have updated the other PC Desktop with Gigabyte p55a-UD4 card and no problem, without doing anything simply to update and everything works the same. A question that I have observed with respect to the touch of the laptop e6420 is that from time to time the touch after a restart stops working and in the preferences of the system I see that the device is not recognized by the system. (USB ports work fine) I'm still not clear on why, but I think this happens when once installed and working everything is correct, if I modify some option of the configuration in preferences of the touch screen, and enable some of the options that default come without enabling after And restart not always but sometimes I check that it is not recognized, I wanted to ask if someone has happened to something similar. Maybe I should not modify any of the trackpad options (preferences) that already come by default when the installation is done. The truth is that it has me baffled, this theme of the touch screen. thank´s

Yes

I apologize for my English, Hervé, I may not express myself adequately at the time, I was referring to the installation of Os X, specifically in a laptop Dell E6420 i7 that you buy second-hand. When I saw in good the operation of another laptop that I have always that is also the model E6420 but with micro i5. The problem that tube, I think was that laptop had some problem in the hardware had strange behavior, and finally decided not to continue trying and return it to its former owner. I tried to undo it, I regret the confusion. I currently use a Dell E6420 i5 laptop and an i7 desktop. The two I have updated today from version 12.3 to 12.5 in the case of the desktop there has been no problem, but in the laptop I left without keyboard and tacil, I am using with devices by USB keyboard and mouse. Wanting to solve it again copy the kexts that I use for the installation of MacOx Sierra 12.3 thinking that maybe it would be solved but it was not. In Clover I have not modified or added anything, I do not know if there is any patched for this (keyboard and touch), or a kext to be installed, when I did the 1st installation does not fall because I worked well first and I did not give problem until now To update. I use the kext descagados of this forum of osxlatitude.com. Thanks for the help, and the disinterested collaboration, the help is greatly appreciated, and I understand perfectly that many times it is very difficult to answer the users not experts because we make it very difficult when we do not know sometimes or formulate the question well Nor clearly explain the problems. Yet I repeat that I am very grateful and very happy with the results obtained many times with your help.

I did it and after that I have restarted but it does not work for me. Thanks for the help

I used these commands but it does not work. sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

How rebuild the caches ? How it's done ? Just copy the kext, I did nothing else.

I've updated my 6420 from Dell from 10.12.3 to 10.12.5 and it does not work with the keyboard or the laptop's touch. What can be ?? I have replaced the .kext files of the EFI / Clover / kext cap after updating but still not working. USB ports work and BT also, does not work Wifi dell DW1550, touch or keyboard. Thank you

Hi, The installation of Dell Latitude 6420 i7 finally discarded it because it did not work well the hardware of this laptop, It had some problem the microprocessor. Thanks for the help.

Hi, thank you very much for the advice, I did it but I'm still the same. A question like is that iphone does not connect via Bluetooth to Hackintosh, is it? Normal is to behave like this? I thought that if I connected I even thought it was a very important part (BT) for a correct functionality, however I have managed to connect to the bluetooth of the laptop Hack a Samsung device, they exchange files well, but between iphone and Mac I have not got it. On the other hand, also probe to look for Airport Hack desktop towards another laptop hack and look for mac older, the desktop hack finds the laptop Hack but I can not transfer, icloud icon appears on the Desktop hack but nothing else. I must say that the laptop hack has the BCM94352 Broadcom combo wifi + BT card and on desktop only has a wifi card (D-Link DWA-556), I imagine it will influence for qe to communicate, the fact that one of the machines does not have Of BT. So the tests I made between devices with Bluetooth, and was the case of iphone and Laptop Hack. Thankyou

Hello guys, I have try installed the bcm4352 combo card on the e6420 laptop, which I had pending to try, since on the other mainboard gigabyte P55 I have not been able to make to works the bluetooth. in laptop E6420 Result ,the wifi and bluetooth are working , however my problem persists dont can i linking the devices between the bluetooth and the phone, do not sync and dont´s works AirPort and Handoff. A dissilusion . Thank everybody .

Maybe it is better to look for another option for the bluetooth, I mean another card model ??? And this card will use it for the Dell e6420 laptop.

report System USB option: USB Bus Hub CE700A V1.1.103 Host Controller Driver: AppleUSBUHCIPCI PCI Device ID: 0x3a34 PCI Revision ID: 0x0006 PCI Vendor ID: 0x8086 Hub: Product ID: 0x8021 Vendor ID: 0x0557 (ATEN International Co. Ltd.) Version: 1.00 Speed: Up to 12 Mb/sec Location ID: 0x5a200000 / 1 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0 Built-In: Yes CE700A V1.1.103: Product ID: 0x2213 Vendor ID: 0x0557 (ATEN International Co. Ltd.) Version: 1.00 Speed: Up to 1.5 Mb/sec Manufacturer: ATEN Location ID: 0x5a210000 / 2 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): USB 2.0 BUS Host Controller Driver: AppleUSBEHCIPCI PCI Device ID: 0x3a3a PCI Revision ID: 0x0006 PCI Vendor ID: 0x8086

Apologize for opening the thread in the wrong forum, I will be more attentive. The Fenvi 101 adapter has a USB cable. I have the card connected to a PCIe slot and the cable from the card to a USB port on the motherboard. Before connecting the USB cable of the Fenvi 101 card I have verified that the USB port works well. I have tested it with 2 PCIe slots and with the 2 motherboard USB ports that my board has. May have something to do with the mac model in SMBIOS is Mac Pro 4.1? o maybe something USB port ?? A few months ago I bought a IOGEAR Bluetooth 4.0 USB Micro Adapter, GBU521, which worked, the system recognized and worked well with Bluetooth I do not remember that it would take a lot of effort to make it work, the problem I had was that with iphone was not paired with the system To make functions of Handoff, Air Port and others, that is why I decided to buy bcm94352hmb Combo card, adapted and installed in half mini PCIe Fenvi 101 hoping for greater compatibility and presindir of a D-Link DWA-556 wifi card that until date was Using. This card also I want to test it on a laptop 6320 Sierra 10.12.3 to verify its operation, and if I finish to make it work I will buy another one for this laptop without Fenvi adapter. Thanks

I have surfed the forum and I have seen several threads, I think what I am missing is the DSDT patching. In the system report does not recognize that there is a half mini PCIE and I think it is because it is necessary to do something with the file dsdt.aml that I am using. Does anyone know if it is like this ?? I have also installed Airport_Kext_Enabler by Toleda , toledaARPT.kext, bcm4352.kext and bcm4352BT.kext. I followed the procedure of Toleda and the only thing that works is Wifi Bluetooth no.

Good morning, I am trying to run a combo card New Broadcom BCM94352HMB, on a Gigabyte P55a-UD4 motherboard. For this I am using a card for Half Mini PCIE model FV101 brand Fenvi. I have managed to run the wifi, but the bluetooth I can not. For the wifi I used the following patched: <Dict> <Key> Comment </ key> <String> AirPortBrcm4360 - fcvo </ string> <Key> Disabled </ key> <False /> <Key> Find </ key> <Data> gflSqgAAdSk = </ data> <Key> Name </ key> <String> AirPortBrcm4360 </ string> <Key> Replace </ key> <Data> gflSqgAAZpA = </ data> </ Dict> I have copied these 2 kext in the path EFI / CLOVER / KEXT BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext with this the wifi works but not bluetooth works. I have installed BTFirmwareUploader.kext on both L / E and S / L / E routes No bluetooth configuration preference appears in system preferences. I have tried to modify my config.plist with others patched without success. I attach a screenshot of the properties of the wifi, the dsdt file that I use for my motherboard and the file config.plist that I currently use Can someone help me please??? Thank you P55A-UD4.zip