kekkei

I have tested this on macOS 10.14.6 with AR9565 combo Wifi/BT card. The kexts have been developed by itlwm developer zxystd. Background: Last successful method for uploading Atheros 3012 Bluetooth adapter firmware at cold start on a Hackintosh was a closed source kext developed by @EMlyDinEsH which won't work beyond macOS 10.12. In September 2020, zxystd released Ath3kBT and Ath3kBTInjector kexts for uploading firmware and injecting ids for enabling On/Off switch in Bluetooth PrefPane for AR3012 chip in macOS 10.15+. Kexts were recently improved for compatibility with macOS 10.12+. Caveats: Ath3kBTInjector kext has a small defect: if you want to switch Bluetooth On/Off, you 1st need to turn Wi-Fi off. Ath3kBTInjector can be avoided for those who don't mind grayed out bluetooth On/off switch in Bluetooth PrefPane. Download: Github Release Page Tutorial : 1. Download latest version from developer's Github repo. 2. Place Ath3kBT.kext and Ath3kBTInjector.kext in your OpenCore kexts folder. 3. In OpenCore Config.plist, add those two kexts under Kernel->Add along the rest of your other kexts and enable them. Save your modified config afterwards. Note that, in OpenCore Ath3kBTInjector must be loaded after Ath3kBT. This does not apply to Clover. 4. Reboot your Hackintosh. Debug: For debugging, last boot logs can be Inspected with kext id. Sample log for successful upload of firmware under macOS 10.14.6. 2021-04-05 07:04:58.159179+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::probe 2021-04-05 07:04:58.166509+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::probe 2021-04-05 07:04:58.173544+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start! 2021-04-05 07:04:58.180272+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.186809+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start: device reset 2021-04-05 07:04:58.193656+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start: num configurations 1 2021-04-05 07:04:58.202250+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.208436+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.214628+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.220651+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.226862+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.233100+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.238779+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start Found Bulk out endpoint! 2021-04-05 07:04:58.245970+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT try to load patch rom file AthrBT_0x31010000.dfu 2021-04-05 07:04:58.305477+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT try to load syscfg file ramps_0x31010000_40.dfu 2021-04-05 07:04:58.314216+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT firmware was already in normal mode 2021-04-05 07:04:58.318405+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT: firmware loaded successfully! 2021-04-05 07:04:58.319098+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start: device status 3 2021-04-05 07:04:58.326628+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.722502+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.733098+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.733460+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.735147+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message Source: https://github.com/zxystd/AthBluetoothFirmware/ Credits: zxystd

That's very unstable method ,right ! I think @EMlyDinEsHcan pretty much fix this but seems like he just got invisible at once from long days ...:(

Dear ,you can try doing hot boot to OS X only to support Bluetooth efficiently or via virtual bus to inject bluetooth firmware from Any Linux subsystem in Mac.(Oracle ,VMware etc.) for now until kext for HS is released ....

Thanks again for your major breakthrough Contributions in Hackinstosh Community.Hats off for your sheer interest in Hackintosh even with personal life Difficulties.Keep it up Sir !

I do have ssd on which ,it is installed but it made swapfile on it ,now kernel_task write over 3-4gb in 2hrs ,I deleted and prevented swapfile and now want to configure swapfile on other partition.any help would be appreciated for that .also can you help me configuring my fans ,I see its not running in Mac os

Yeah, its working but move only if you have 6gb+ RAM installed otherwise ,it will freeze at various instances.I open chrome 4-5 tabs and almost all ram occupied.

Dell vostro 3546 Haswell 4400 i3-4005 Kingston SSD MAC OS Version :10.13.3 Working : QE/CI :Fully USB PORTS : All (INCL.USB3.0) Audio Controller :ALC255 Remedy : APPLEALC Layout id: 17except external mic/headset mic/headphone mic Power Management: Using PRSSDTGen.sh WiFi:AR9565 ,works at tx Rate 11mbps max without 5ghz Channels .remedy : customised injector *core capture.kext *core responder.kext *patched Atheros40.kext Bluetooth: OOB //always on BRIGHTNESS CONTROL: Working HDMI:PORT UNAVAILABLE Touchpad/Keyboard: Working Good RehabMan Sir PS2 Controller.kext Sleep:working with powernap disabled through clover.//darkwake=0 **Issues** :Target 1.Implementation of Fan Control Brief: My CPU Fan seems to be not running.Need more investigation. 2.External Mic /Headset mic (combo jack)not working (complex path for amp && needs additional quirks) Needs Investigation.

Please check message.Sir @Jake Lo .I also have three finger swipe gestures for left &right not working.Using RehabmanPS2Controller ,Synaptic Here.

Thanks goodness ,I am so dumb.

Here is the debug file.kp problem solved .only WiFi /brightness not working .I have upgraded from sierra , ,however I have deleted system network preferences. Plists.even using WiFi patches ar9565 ,it shows wifi hardware not found debug_6902.zip

Not working for me ,tried all lilu + ath9k*.kext using ar9565 in 10.13.3.

i am having power management issues unknown cpu kernel panic on boot high sierra 10.13.3

pls elaborate steps for same ,or please attach your configs

Its Rehabman's VoodooPS2Controller.kext (synaptics)

Hi, Jack Lo ,sorry for late reply, I am expecting a power shutdown dialog menu on pressing power button or ctrl+powerbutton. Thanks

An off topic , nothing happens when i press power button ,(power button is not configured) .Although ,eventually on pressing it for long time ,system turn off (which is hardware feature). further ,instead of alt+ctrl+delete key comb. ,i have alt+ctrl+insert as sudden reboot (described by Rehabman in voodookeyboard.kext ). Sent from my Redmi Note 3 using Tapatalk

Thanks again Jack Lo Sent from my Redmi Note 3 using Tapatalk

Yeah,i knew that layoutid is in hex,as like 0x11 is for 17 decimal,i am trying to see this property key & value and device id in IOHDSCODECDEVICE@3,0 instead. Further,i have disabled my both output other than lvds ,@1 and @2 (it is in 9mb cursor bytes patch).Because it cause a little lag while login and after sleep.Forget it . I just want to learn to patch for hdmi as i seen people with hdmi visible in dpci manager.(i have stated in first post that i want to know patching instead) Also,i have a single physical output other than lvds,which is vga no dp ,no hdmi.So will try someday with vga output(i know it has nothing to do with hdmi audio).also,you have confirmed that hdmi audio is working without visible under dpci,that is enough. And thanks a lot again for your concern.

I am extremely sorry for what i mentioned , I beg pardon for that, i had decompiled my acpi tables 1 year ago.looked again and found that none of mentioned above flaws are from your side.i don't know why it has defined 8 cpu cores while i can see only 4 cores in ioreg working ,others are just dummy entries.again sorry for what i said,just forget it. But,i still cant see Intel Hdmi audio controller under Dpci manager below realtek audio .(see screenshots) I dont think it is necessary to add dsdt.aml in config.plist.is it necessary ? I have also attached my ioreg .is it correct for hdau from your view ? ioreg+dpci_screenshot.zip

Yeah @Jack Lo ,i included all dsdts ssdts except ssdt-02 since it has 8 cores defined further i added back dell ps2 hack ssdt by Rehabman for fn control keys working.I have seen myself that u have injected the layout 13 in ssdt-07 but yet is not available in ioreg under hdau .However same is available under audio sec. Of system profiler.Also ,Since u have disabled clover patch for renaming these yet i can see hdau and igpu instead of bod3 and gfx0 .means ,ssdt-07 is injected but no layout id in hdau section. thanks Thanks

As i said,there is no layout-id visible under HDAU .so i guess its not eanabled.have you patched for dedicated gpu too.

Sir,First of all thanks for patching. But,I would like to learn for enabling hdmi. Can you please make a guide or give me a good link of your patching . Also,Can you seek into solution for line in detection for HeadPhones by KNNSpeed@Insanelymac (http://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/?p=2453130) for alc255,however he has alc298 ,and i want coefficient ids and parameters for alc255. Thanks a lot. Update:-Tried your setup Intel Hdmi Audio controller still isnt visible in Dpci Manager. Thanks

Here it is. Should i attach ioreg ? Currently i have disabled 2 other ports except lvds. CLOVER.zip

Dear @Jack Lo,I am currently using sierra 10.12.2 on my mobo vostro 3546-Almost same config as Dell inspiron 3542.Only the differnce is Vga output instead of hdmi. Specs:- i3-4005u HD4400 ALC255 AR9565 combo Problem:- Currently i am using Rehabman's Clover predefined config.plist for 4400 graphics.Everything working fine as real macbook but I want to make Intel Hdmi Audio controller visible under dpci manager below Realtek (××××) in Sound Tab. I have enabled Bod3 to Hdau from Dsdt hot patches.Further in kext2patch ,i have tried both 9 and 12 patch for AppleintelframebufferAzul for both port 204 and 1** .Also i have working Applealc inject id13 . Done Hdas to hdef,Irq fix from Dsdt patches.Is Fake_Intel_hdmiaudio.kext is needed if i have 8086:0a0c which is supported by apple. Further,how to inject hda-gfx"="onboard-1" on HDAU and inject layoutid to hdau,igpu.(layout13).However in Apple system info ,in Audio Devices i can see Hdmi devices ,but in Dpci manager ,its not present. Thanks ,so for short I want to know Inject hda-gfx"="onboard-1" on HDAU,hdef,igpu and inject layout id to the same,Further if any hope for vga controller,tell me. Thanks

Hello, Everyone i am using Dell Vostro 3546. And for Audio Codec ALC255, I am using Applealc.kext along with Lilu.kext Everything is working fine except External mic(Line IN not available) .If anyone succeded in patching for external mic .pls help Thanks.