alfalus

Both output (internal speaker & headphone) are working

i already install this kext sir. Is there anything else to do before install the codec_commander directly ?

Anyway, the mic is so low (both of internal and headphone mic). I'm trying to record the audio, but the sound of recording is so low. I think is under frequency or something else. How to correct this ?

good news, now mic is working with your kext + layout id 13 . Thanks sir for your help

But, the bad news is sometimes the audio output gone and made a garble sound. And i must restart to get audio working normally. Any solution to fix this ?

first try this kext then we gonna know its fine for you 

Okay, i'll try this night. By the way, what should i do to install that kext ? Remove the vanila AppleHDA first and then install the kext that you send to me in S/L/E ? 

Thanks sir, i'll try it later. But please take a look to my work. I want to know that is right or not.

post full codec dump 

 

you can try this too 

https://github.com/insanelydeepak/cloverHDA-for-Mac-OS-Sierra-10.12/blob/master/Laptop/ALC233.zip

okay, i already update the file. Please take a look.

https://drive.google.com/open?id=0B7D94Yr6g-W-V2ttTnNlSkJkRHc

@alfalus

ALC3236 aka ALC233 is available in AppleALC.kext + Lilu.kext

Layout-id = 4, 5, 28, 29

 

Give that a try

Thanks for your reply, i already try all of layout id. Nothing mic is working sir.

I am very grateful if you want to correct my work. 

https://drive.google.com/open?id=0B7D94Yr6g-W-V2ttTnNlSkJkRHc

for getting Input/output you just need for 4 nodes 14 = dec 20 , 18 = 24 , 19 = 25 , 21 = 33 , use it verbs and pathmaps , you dont need to care about rest 

 

but in somecase or somehow nodes are not in use mess with other nodes so its better to disable them like this guide says 

personally i never disable them everythings works fine 

Well, can you correct my calculation (verb and pathmap) results ? I can't upload on this forum, so i drive it.

Here : https://drive.google.com/open?id=0B7D94Yr6g-W-V2ttTnNlSkJkRHc

that is ALC 3236

Could you tell me more from this step 

Now, we assemble the calculated codec verb commands so we can use for AppleHDA patch.
<01471c10 01471d01 01471e13 01471f99 01470c02
01871c20 01871d10 01871ea1 01871f04
01971c30 01971d01 01971ea3 01971f99
02171c40 02171d10 02171e21 02171f04>

To This Final codec verb step ..

DISABLING THE NODES (PIN COMPLEX) THAT ARE NOT USED:

We should disable the nodes that the codec is not using, so we can avoid any issues from them. Use the following the verb data for disabling those nodes and calculate verb commands.

Verb data for disabled node:
F0 00 00 40

Final codec verb commands with disabled nodes are:
<01271cf0 01271d00 01271e00 01271f40
01471c10 01471d01 01471e13 01471f90 01470c02
01771cf0 01771d00 01771e00 01771f40
01871c20 01871d18 01871e81 01871f04
01971c30 01971d10 01971ea0 01971f90
01a71cf0 01a71d00 01a71e00 01a71f40
01b71cf0 01b71d00 01b71e00 01b71f40
01d71cf0 01d71d00 01d71e00 01d71f40
01e71cf0 01e71d00 01e71e00 01e71f40
02171c40 02171d10 02171e21 02171f04>

I'm confused because before the final codec verb is only 4 node that is (14,18,19,21). Then in the final calculation there are many node as you can see above (12 until 21). From where that all nodes except (14,18,19,21) ? Please tell me more. 

Anyway sorry for my bad english 

Hey, should i install both of ELAN and SmartTouchpad ? i have tried to install ELAN only and the trackpad and setting gone and then kernel panic shows.. How can i fix the trackpad ? 

Sorry for my bad english