orbislacteus

OK, I switched back to. Sierra. Seems to be easier. But Problems are similar: Brigittes Slider works, but doesn't change brightness. If the screen is switched of, ist never comes back. mSATA 2240 SSD fits perfectly in the WWAN Slot - but is not recogniced by the Bios as far as I can see. Debug Files attached. debug_10956.zip

OK, I give Sierra another try. I switched the SSD against a noname SATA SSD, which makes no Problem recognizing. Do you have an Idea, if i can get a SSD working in the m.2 port with the WWAN Card? Then I could make a fusion drive.

I just copied the EDID into my config.plist and got no kernel panic, but a blank screen after loading. Clover Version is 4268. Will try a newer one later. Maybe it has something to do with the patched DSDTs, that do not match the CPU?

Thanks, but that one throws a Kernel Panic

It did not work - Injected System ID für MacBook Air and for MacBook Pro - none solved any of the Pproblems. Maybe I try to get Sierra running instead, but the SSD is noch showing up there in the installer ...

AH, thanks - what do I do about the Brightness? Or is it also fixed with a System ID?

Another problem, that I just recognised: It doesn't wake up from switched of screen - only if I close the lid and put it to sleep completely. But after that I get graphic errors

Very nice tool. Here is the Bug report: debug_27475.zip

OK, the Kernel Panic seem to originate from a change in the boot options of the config.plist. Maybe Clover Configurator mixed up something there. Mapping of Karabiner seems to be Ok, but the brightness control itself is not working correctly, since the slider in Display is not working as well. Any idea how to fix this?

@Jake Lo That means it only works with Karabiner Elements? On Sierra it worked out of the box - as far as I remember. Anyway: I installed Karabiner Elements and get some strange Behaviour here: The Brightness Overlay is shown, but Brightness doesn't change - except if I reduce it to the Minimum, the screen wents black and never comes Back again. After restarting I get a Kernel Panic.

Yes, I looked there.it didn‘t show up there. Seems like Disk Utility doesn’t show unpartitioned drives. It showed up regularly after I partitioned it with gparted and created an ext4 drive. Also it seems like brightness controls do not work properly on HS. Fn keys have no effect and slider behaves strange. Is there a fix?

Ok, I got it working. Partitioned the disk under Linux and finally showed up under Disk Utility. Thanks for the support.

Yes, i have hfsplus and apfs.efi on the Stick. But that would only be a Boot issue as far as i understand it. The drives should also show up without them in Disk utility. Sata is set to ahci.

I do not see any ssd drives, so i can't format it neither apfs nor hfs+. The hardware is simply not recogniced by MacOS.

Hi folks, this is my first post on this forum. Did some Hackintoshing before, but don't know all the stuff. At the Moment im trying to get Sierra or High Sierra working on a E7270. I managed to install SIerra, but then I switched the ssd against a 512 GB Toshiba m.2 PCIe, which is not recogniced in the installer of Sierra. After tryying some patches for Sierra (Pike R Alpha) which did not change anything, I tried High Sierra since support for NVMe should be better there. Finally I reached the installer there too, but no SSD showed up. Any suggestion how I can make it visible during installation? I would be satisfied with Sierra or High Sierra. Thanks in advance