g73 Beast

Does anybody else have an issue in Sierra where you select multiple items using the "shift" key and any arrow key and it toggles the mute/unmute bezel? I have Karabiner installed but it doesn't make a difference if I quit it or not. Everything else works fine.

Do you have any injectors for wifi? I know btfirmware uploader doesn't play nice with certain injectors.

Wonder what would happen if I select standalone firmware on a combo card? Would it corrupt it?

I wonder if there is another firmware available to use for the aw-ce123h? I think the firmware causes an interference with wifi because if I turn wifi off, the signal doesn't break up and the range is exceptional (RSSI:-54)but when wifi is turned on, (RSSI:-70's to -80) but in windows the range is perfect with wifi on. I would like to beta test if anything can be done to improve bluetooth because I am sure someone else is having this issue as well?

When you say wifi dies, do you mean that it disappears or does it refuse to connect? Best thing for now is install another operating system and check if the same behavior occurs so that we can rule out bios issues.

Out of curiosity, did you connect the proper antennae into the proper places? Did you clean the antennae before installing? I think the bios doesn't play well with combo cards. Does the same occur with windows or linux?

Did you already remove the whitelist on the bios as lenovo likes using them. Try shutting it down, take out the battery and hold the power button for 10 seconds. Maybe that'll help

Never mind, I have fixed the problem now. I had to patch XHC and EHCI in my dsdt and now it works ok. By the way, I sent you a $15 donation. Thanks for your work

The kext does indeed make my bcm 94352 combo work on my asus g75vw but, I can only sleep once. If i try to sleep again it will just hang. I am stumped. I am guessing dsdt issue but I don't get why it would sleep once. I attached an IOREG dump and my dsdt if you could take a look? Thank you very much again for all your hard work with hackintoshes. EDIT: Using toledo's kext in combination with yours using FW=3, I can sleep and connect my bluetooth devices. However, if I turn bluetooth off and go to sleep, it doesn't sleep and I have to forcefully turn it off. I think I'm close to solving it though. I think it could be xhc error with my usb controllers? I will update if I find anything else. bluetooth.zip

I tried adding the gnu name into the dsdt but it won't compile...i added it to where the gpu is located in PEG0 but no luck. Do you have an idea what i'm doing wrong? Thank you very much for your help! **EDIT** Never mind i fixed the GPU name! I was adding the name in the wrong place! However, the EAPD doesn't activate until i sleep which is the opposite of everybody else problem! Is there a way to add the EAPD wakeup in the dsdt after reboot? Thanks!

You are awesome! Theres just a couple glitches like sound through the internal speakers don't work until i sleep and wakeup which must mean the EAPD is not woken on boot but only after sleep. And then a minor thing is under sys profiler, the gpu name is shown as nVidia GPU,,,,,, 1024 MB instead of nvidia geforce gtx 460m 1536 mb. You are awesome!

Hello, EMlyDinEsH, i know you are busy, but were you able to take a look at my dsdt to see if HDAUDevice was added properly? I am clueless now... Thank you!

I guess this issue will remain unsolved?

If i were to use this method, would the keyboard backlight bezel show up? And does it the fn f3-f4 keys instead of ctrl + alt + or - as in Rehabman's voodoops2 drivers?

Here's a clean unmodified dsdt. STOCK DSDT.zip

NO idea i guess??

Could it be the efi string in boot plist interfering with hdmi? Also I noticed when viewing my dsdt HDAU device is under GFX0 but it is not a separate device...I remember having the same problem with PNLF before where brightness wouldn't work or show up in IOREG until it was a separate device. I keep getting compile errors when I do add it as a separate device. Any ideas?

The kexts i use to read the battery info give me a KP when its enabled. I dont need anyway because i used the old way with Extensions.mkext and it works the same. I have no idea why it doesnt like the kernel cache but if it aint broke i shouldnt fix it! I had a hdainjector in modules folder so i deleted them but i havent plugged into a tv yet but still no HDMI in Sys Profiler and ioreg. Oh and i got dictation working too it wasn't sound related it was wrong nvram info.

Sure thing boss! I appreciate it! dsdt.aml 2.zip org.chameleon.Boot.zip

THe graphics card EFI hex had to be injected via org.chameleon.boot under device-properties. THe auto injection from Graphics Enabler is not specific enough since the backlight is controlled through GFX0 unlike the laptops with intel integrated graphics and etc.

Dictation no longer works even if i clear caches and com.apple.assistant but no biggie. Again, i really appreciate you taking your time solving my problem!

No HDMI (hdau device) It doesnt show up in ioreg and sys preferences. I wonder if something is interfering?

I checked system preferences when i plugged in hdmi but it only detects the laptop speakers.

Sure thing boss! I looked through it as well and i cant find any hdmi devices at all IOREG.zip

Should hdmi output show up in system profiler? It doesn't show up and EnableHDMIAudio=yes in org.chameleon.boot does nothing. Ill have a look at ioregistry.