derikke

here is my Model, for the list un 10 03:18:44 praklarushtaonass-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint::identify: Found ALPS Device with ID E7=0x73 0x02 0x64, EC=0x88 0x07 0x9d Jun 10 03:18:44 praklarushtaonass-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint EC Report: { 0x88, 0x07, 0x9d }

I will if I'm @ home again. Tapatalk is noticing me...

I will look @ it tomorrow it's gmt+1 here so nearly 10pm

Ok V4 works now, thank you for the hint! 2 Finger scrolling is working too! i´m happy ;')

That's a very good question. I will try v4 again cause the e5520 has a multi touch touch pad, i will report back.

Hi, can´t get my touchpad working with 1.8.4 Keyboard is working fine, any idea someone ? Laptop is a Dell Latitude E5520 May 31 11:11:54 localhost kernel[0]: ApplePS2Controller::start entered... May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: initial commandByte = 45 May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: new commandByte = 44 May 31 11:11:54 localhost kernel[0]: ApplePS2Controller::start leaving. May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard: Swipe Up: { 003b, 0037, 007e, 107e, 1037, 103b, } May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard: Swipe Down: { 003b, 0037, 007d, 107d, 1037, 103b, } May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard: Swipe Left: { 003b, 0037, 007b, 107b, 1037, 103b, } May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard: Swipe Right: { 003b, 0037, 007c, 107c, 1037, 103b, } May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard::probe entered... May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard::probe leaving. May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard::start entered... May 31 11:11:54 localhost kernel[0]: ps2bl: KKCL, KKCM, KKQC methods not found in DSDT May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: oldCommandByte = 44 May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: setCommandByte for keyboard interrupt install May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: oldCommandByte = 44 May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: newCommandByte = 45 May 31 11:11:54 localhost kernel[0]: ApplePS2Keyboard::start leaving. May 31 11:11:54 localhost kernel[0]: VoodooPS2SynapticsTouchPad Version 1.8.4 loaded... May 31 11:11:54 localhost kernel[0]: ApplePS2SynapticsTouchPad::probe entered... May 31 11:11:54 localhost kernel[0]: VoodooPS2Trackpad: Identify bytes = { 0x0, 0x0, 0x64 } May 31 11:11:54 localhost kernel[0]: VoodooPS2Trackpad: Identify TouchPad command returned incorrect byte 2 (of 3): 0x00 May 31 11:11:54 localhost kernel[0]: ApplePS2SynapticsTouchPad::probe leaving. May 31 11:11:54 localhost kernel[0]: ApplePS2SentelicFSP::probe entered... May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: Timed out on mouse input stream. May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: Timed out on mouse input stream. May 31 11:11:54 localhost kernel[0]: ApplePS2SentelicFSP::probe leaving. May 31 11:11:54 localhost kernel[0]: ApplePS2ALPSGlidePoint::probe entered... May 31 11:11:54 localhost kernel[0]: ApplePS2Controller: Timed out on mouse input stream. May 31 11:11:55 localhost kernel[0]: ApplePS2ALPSGlidePoint::probe leaving. May 31 11:11:55 localhost kernel[0]: VoodooPS2Mouse Version 1.8.4 loaded... May 31 11:11:55 localhost kernel[0]: ApplePS2Mouse::probe entered... May 31 11:11:55 localhost kernel[0]: ApplePS2Mouse::probe leaving. May 31 11:12:19 praklarushtaonass-MacBook-Pro kernel[0]: ApplePS2Keyboard: sending key 19=23 May 31 11:12:19 praklarushtaonass-MacBook-Pro kernel[0]: ApplePS2Keyboard: sending key 1f=1 May 31 11:12:20 praklarushtaonass-MacBook-Pro kernel[0]: ApplePS2Keyboard: sending key 3=13

Ok my E5520 Model is now fully functional with ML 10.8.3 with all updates i´ve added a Atheros AR5B91 for native wifi. sleep, battery etc is working fine, got some trouble with full brightness after sleep... i will finetune this and repost. But i've no clue to get my cardreader to work, extra package for boot and run is attached. Extra5520_i5_2430m.zip

Ok understood. Any interest to add this e5520 model to edp if finished?

This dsdt is not patched it is my clean. Dsdt patch for duallink is available in the Internet. But i need a fully patched one for power management / sleep. I could provide my clean dsdt with duallink, but that will not contribute to the e5520 edp, it's only patched to get the right resolution nothing more. So who can help to get the package complete?

Hello Team, i can´t install ML with your given Bootpack. I´ve had extract my own DSDT an pachted it with DUALLINK, now the gfx part works. Could someone please include my E5520 Model and fix sleep etc in DSDT? Clean DSDT is attached. My Latitude E5520 Specs: 1PROCESSOR : ONE INTEL CORE I5-2430M (2.4 1DISPLAY : 15.6IN ULTRASHARP FULL HIGH DE 1PALMREST : DUAL POINT TOUCHPAD AND TRACK 1CAMERA : CAMERA WITH MICROPHONE 1MEMORY : 4GB(2X2GB)1333MHZ DDR3 DUAL CHA 1WIRELESS : DELL 375 BLUETOOTH CARD 1KEYBOARD : DUAL POINTING INTERNAL KEYBOA intel HD 3000 @ 1920x1080 dsdt-e5220-clean.zip

after reinstalling EDP 2.2 sleep is working fine now ...weired Did someone have a clue why the volume sensivity is so "nervous" under Lion ? I´ve got my sound at the most bottom off the slider (feels like 2% or so), but it´s always a bit too loud. so 50% slider is not really 50% volume, as it is under windows @ the same D520

Hi folks, im trying to rebrand my BCM card under Ubuntu 11.10. Always get the error Illegal value for sprom_rev. any help ?

USB wake in BIOS ? have to research this setting, but from that, yes all !

Hello all, if done all steps regarding the Wiki. It has worked OOB with Snow Leopard. But now everytime i will get out of sleep my Laptop reboots. Are there any new fixes avaible for Lion ?

Any news on this ?