polyzargone

Chameleon is the latest one 2377 and I tried GraphicsEnabler=No. I've just made a test on another Hackintosh with a myHack 3.3.1 fresh install (no MBR patch and no customized Extra folder) and it gave me the exact same error so it's not related with D830 setup, the issue come from myHack install. With Pandora's box and the same Install Mavericks.app the process runs just fine and I can boot without problem straight to the install screen, but with myHack, no way.

 

BTW, I did a Dell Online Diagnostic with MyDell Tool and except for the battery and LCD screen issues, the re's no other identified problems.

Got a new Hard drive, so i'm now trying fresh install on internal rather than USB but still the same, hangs at ACPI_SMC_PlatformPlugin::registeredLPCDriver - Warning - LPC device initialization failed : C:state power managment not initialized

Ok, thanks for your time and help !

Yes I did. Both Quick and Full.

I also tried to boot on myHack with a non-modified Extra folder but no results.

Actual :

AppleACPIPS2Nub.kext

ApplePS2Controller.kext

BCM5722D.kext

FakeSMC.kext

 

Original from D830 bootpack mav Nvidia :

AppleACPIPlatform.kext

AppleACPIPS2Nub.kext

ApplePS2Controller.kext

BCM5722D.kext

FakeSMC.kext

IOATAFamily.kext

lspcidrv.kext

NullCPUPowerManagement.kext

Patched_10.7_AppleRTC.kext

VoodooTSCSync.kext

the BIOS is A17 (the latest) and removing extensions from E/E made no differences. Still hanging on at ACPI_Platform …power managment not initialized. I check that the plugins folder in the myHack.kext doesn't contain anything else than PS2 and FakeSMC, Broadcom Lan kexts.

Well, the exact message is ACPI_SMC_PlatformPlugin::Start - waitForService(ressourceMatching(AppleIntelCPUPowerManagment) timed out

 

with boot flags :

arch=x86_64

UseKernelCache=No

USBBusFix=Yes

GraphicsEnabler=Yes

- v

 

sometimes, I can go to :

 

ACPI_SMC_PlatformPlugin::registeredLPCDriver - Warning - LPC device initialization failed : C:state power managment not initialized

Hello,

 

Thanks for help. I know that mixing differents method is not a good idea but I never had any success booting the MyHack USB pen. It always hangs at that Missing bluetooth controller. whatever I do.

 

So how can I enable QE/CI for the Nvidia without Natit, plist Editing or boot Flag GraphicsEnabler=Yes/No ? Using the DSDT from the bootpack doesn't change anything.

Hi everyone,

 

Got a new D830 but I'm facing multiples issues to get the setup works.

 

It's a sandard Dell D830 Nvidia Quadro NVS 135M serie with Core2Duo T7250 2Go RAM.

 

BUT :

The LCD is dead so I've remove it and it's now connected to an external LCD Scrren via VGA outpout

AND :

No internal Drive, so I use an external USB disk with 1 MBR partition for Windows 8.1 and 1 MBR partition for Mavericks HFS+ journalised.

 

AHCI support (useless in my case) is enabled and the BIOS settings are those given by your Install Guide for D830 systems.

 

I first tried to create an USB install pen with MyHack 3.3.1 but it's stucked at Bluetooth Missing Controller etc… I tried to skip the MBR patch and do it later using InsanelyMac method and I also tried a lots of Boot flags, but no changes.

 

So I create another one with Pandora's box and I can boot fine and install Mavericks. I've noticed that the installer doesn't create a boot file and there's no Extra folder too. Hopefully, because it's just an USB disk I've just plug it in another Mac and did it manually (using MyHack to install the D830 mav bootpack Extra folder).

 

So I can boot and configure the system.

But I tried to use EDP post install tool to enable QE/CI on my setup and it just fails. Natit is installed but there's no QE/CI. I've tried to download a fresh Natit kext from OSX86.net (which is strangely 7Mb where the EDP one is about 77 Ko) but it's still the same.

 

I know it's an unusual type of configuration but it should works. Any ideas ? Thanks