krzysztofc10

Without Flags you have FakeSmc issue. I don't boot with -x it's not necessary and I don't copy kernel, Kernel is unpacking itself with this installer. You have Yosemite ready to boot with it And you only need copy your Extra to root of your USB. So try again maybe something goes wrong at the first time In Chameleonboot.plist you can change your resolution to 1920x1200 for your display. And booting OSX installer hangs at some points but In a while it goes ahead

Try again with the Extra that I've uploaded for you in previous post

Tkanks I can suggest to format your flash drive and make one more time bootable USB copy latest EXTRA and everything will be Okey I think boot with -f -V and wait setup will run

If you will wait it will go ahead But If you want I upload Extra with Bluetooth kext and I will edit my topic. I've tested every procedur on my second Dell E6400 And Kernel was copied with boot.pkg with no problem

Extra.zip

I've just write a Guide at the first page of this thread Try that!

 

Cheers!

Yes, I'am I will Edit Topic Soon.

You're right Hervé. Sorry for trouble!

Yes but it's similar laptop and some kext will work. And someone post there kext for E6410 f.e touchpad. It's clear that FakeSMC.kext, Smibios.plist and dsdt.aml you will need for your laptop specs. But Steps are the same

https://osxlatitude.com/index.php?/topic/6740-yosemity-e6400/ - here you have

I will upload today Sound kext

 

Cheers!

I did in Yosemite Topic but kexts aren't optimized yet for 10.10. For E6410 you will also need DisableTurboBoostBattery.kext because I have Core 2 Duo and Herve note that it's only for 'I' Processors And Jake Lo post Sound and trackpad/trackstick kexts for your model also in Yosemite topic

So at first read topics then start new one

 

Cheers!

I don't use any other kexts I'm using this kexts with Mavericks and with Yosemite too. FakeSmc.kext Hervé help me modify for my laptop and you can find it in Yosemite topic But in Yosemite works only trackpoint with some kext that I've borrow from other laptop from E6XXX series I didn't found ps2 kext that will work with our tuchpad Yosemite need to work to get performance in our laptop .I boot Yosemite with Chameleon and now I'm running with Mavericks and Chameleon 2.2 r2391 because I can edit smbios.plist and Processor is recognized properly  In Chameleon from myhack when I edit smibios.plist it recognized only at 2,54Ghz. Clover fully recognized My parameters but GUI slow down. So I'm using new chameleon but it will boot only when I add flags -f -v :C that's only problem. And I feel the diferences in performance.

Fakesmc is imported from Mavericks topic and GUI was working fine with Chameleon and this FakeSmc.kext I don't think that is FakeSmc kext, rather something with config.plist   Anyone have config.plist with similar parameters ? And Smbios.plist don't help.

 

My Specs:

Core 2 Duo T9600 2,80Ghz 6mb cache

4GB RAM 800 MHZ

Nvidia NVS 160M 1440x900 display 

 

I am using Clover configuration for edit config.plist 

Hello !

 

I've installed Mavericks on my Latitude E6400 with NVS 160m

 

At first I have Chameleon bootloader installed with myhack but when I look in "about this mac" My CPU was reported as 1.6 GHZ but I have T9600 2,8Ghz Cpu, also Ram was reported as 766MHZ but I have 800 Mhz . So someone in this forum sugested that Clover will fix this problem because its Newer. So I've decide to install it on my Mavericks 10.9.4 Disk. I've install Clover Efi v2 2774 with this options :

 

Bootloader - install boot0af in MBR sector

CloverEfi - CloverEfi64 bits Sata

Drivers64UEFI- EmuVariableUEFI-64, OSXAptioFixDrv-64

Install Script RC in source disk

Install Clover preference panel

 

Of Course I've copy Kexts from /E/E chameleon to /Efi/Clover/kexts/10.9 and DSDT.aml from /E to /Efi/Clover/ACPI/PATCHED

Everything works but I know that I don't have plist optimized for my laptop   and GUI is laggy   I have NVS replaced in /S/L/E because I replaced it a long time ago and with Chameleon everything works great But now my CPU is reported as 2,79GHZ and RAM 800MHZ. Any idea what to do to Speed Gui ?    And yes I;ve deleted old chameleon /E files

So try with DP 4 I will also try

Every files need to install and boot OSX I've just post You will find everything in my E6400 Yosemite topic. I will help you but i don't have Yosemite beta anymore :C Now I have old good Mountain Lion And graphics is super smooth In Yosemite Gui is slow on our Nvs 160, in Mavericks you can also feel that :C so I've just decided to wait for someone who will do great job and prepare drivers for our laptop

 

1.Create bootable USB but make sure that is formated to os x journaledand set GUID - Boot USB OS X Yosemite (Chameleon).zip use this simple installer

2.Extract and copy to root of your usb this Extra.zip

3.When you will boot you can use command -v -f

 

Did you do that ? 

Anyone have Extra Folder ready for Yosemity DP2 latitude e6400 ? 

Trackstick doesn't work but I don't use it so its ok touchpad works. Sound doesn't work :C is ok that I have AppleHDA in /E/E or should I also remove it like in /S/L/E ? Your graphics work smoothly?

Ok.

1. I've change Smbios.plist MacBookPro5,3,
2. I've edit Smbios file to MacBookPro5,3!.
3. I've add GraphicsEnabler- Yes to Chameleon.boot.plist. 

Results:

Notification center works better, it's not laggy. Launchpad works like charm. But Apps f.e Mail have poor perfomance :C When you move window, its laggy and moving from mail to mail its also visable I think someone good will release nvidia nvs fix

What about sound, touchpad/trackpad kext ?

Any Advise ? 

This is my Extra Folder I've Install Chameleon r2380 on Yosemity partition. This is my Extra folder, please check If I do everything what you write I'm using kext for touchpad and keyboard form other Latitude E model, work only keyboard and touchpad(freeze and work unstable because it's from oder model, I don't know how to get for my model to work), Sound doesn't work at all, And Gui laggy :C notification ceneter and apps :C W8 for you reply! Thanks Herve! 

Extra.zip

Ok So I've did what you suggested And OSX boot up but I have wrong CPU clock, and touchpad is laggy :C Any sugestions ?

honestly I copy Extra boot from Mavericks and replace some kext and add some flags, but I don't change it because I really don't know that much about hackintosh, still learning  Ok I'll

I will add this flag but I'm all time boot with -f -v flags in chameleon bootloader. I will figure it out what are you write about FakeSMC.kext  and other. I will install Beta 2 now. Thank You Herve for you respond ! I'm Newbie but I want to Learn !  I'll write soon.

Is there better Nvidia NVS 160m kext ? because that from 10.9 make osx 10.10 reaction slow :C If anyone have better kext or know how to fix cpu osx specyfication reply !  

 

Sorry for my bad English  

I hope that not only I want to make OSX 10.10 work like 10.8 on our Dell

Yeah ! Animation and perfomance is very poor   but when Chameleon start booting OSX it actually display proper values If I will have some free time I will work on this

 

Btw I get touchpad to work, Replace this kext and remove other. So you will have kext like in this picture. 

VoodooPS2Controller.kext.zip

Yes ! You're  right But Yesterday I've just want to install and boot OSX 10.10 Now I edit Smbios.plist And problem solved  

 

I've Added this flags to Smbios.plist - field it with your own specs

 

<key>SMexternalclock</key>

Here you have Extra folder with kext. No sound and touch pad for now :C Keyboard and trackpoint works

Cheers!

 

---ATTACHED--- 

1.Boot USB OS X Yosemite (Chameleon).zip

Instructions are here  http://www.insanelymac.com/forum/topic/298753-boot-usb-os-x-yosemite-chameleon/

2.Chameleon r2377.pkg.zip

When the installation will end, you must install this chameleon from other MAC to your HARD DRIVE, and copy Extra Folder from this post to ROOT of your USB Driver Delete before Folder that create chameleon  

Extra.zip

Boot USB OS X Yosemite (Chameleon).zip

Chameleon r2377.pkg.zip