dlhxr

I have a realteck bluetooth but with Azurewave vendor id. Is it possilble to work? Detailed information is following. Realtek Bluetooth 4.0 + High Speed Chip USB\VID_13D3&PID_3410&REV_0200 Port_#0006.Hub_#0003 Edit: I add the VID and PID by myself. I saw the log in the verbose mode. The BTFirmwareUploader says successfully patch the firmware and the PID and VID in the log is the same as my bluetooth. However, at the last period of booting, the error log keeps bumping and bumping. 10/23/14 10:54:31.000 AM kernel[0]: BTFirmwareUploader :: Broadcom Standalone Bluetooth controller found 10/23/14 10:54:31.000 AM kernel[0]: Bluetooth Firmware Uploader v2.6 Final Copyright (c) 2012-2014 EMlyDinEsH (OSXLatitude). 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x4000 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][DeviceRequestCompleteHandler] -- Received 0xE000404F (kIOUSBPipeStalled) -- 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][DoDeviceReset] -- thread_call_enter1 (mReEnumerateOrResetThread) -- reEnumerateOrReset (0xffffff80d6c7be10) = 2 -- returned FALSE -- 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][ReEnumerateOrResetThreadEntry] -- entering -- param0 = 0xffffff801da74000, param1 = 0x2 -- 0x4000 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- entering -- reEnumerateOrResetIn = 2 -- this = 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- in our workloop -- 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- parameter is valid -- 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- reEnumerateOrReset = 2 -- 0x4000 **** 10/23/14 10:54:31.000 AM kernel[0]: [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- calling myHub->ReEnumerateDevice() -- gEnumerateCounter = 1 10/23/14 10:54:31.000 AM kernel[0]: [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- exit; error = 0x0000 (kIOReturnSuccess) 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][ReEnumerateOrResetThreadEntry] -- exiting -- 0x4000 10/23/14 10:54:31.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService 10/23/14 10:54:31.000 AM kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0xf680 -- 0x0000 -- 0x4000 **** 10/23/14 10:54:31.822 AM sharingd[223]: 10:54:31.822 : SDStatusMonitor::kStatusBluetoothPowerChanged 10/23/14 10:54:31.823 AM sharingd[223]: 10:54:31.822 : SDStatusMonitor::kStatusBluetoothPowerChanged