Jump to content

idle

Members
  • Posts

    24
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by idle

  1. From the internal hard drive. In other matters, I don’t know how, but the problem with the message about incorrect shutdown went away, maybe after updating OpenCore. Now I have OpenCore 0.9.4 installed and I have successfully installed the public beta of Mac OS Sonoma, Wi-Fi is no longer available, but I believe that this problem will be quickly solved by advanced hackintosh people after the release of the final version... Also, the geolocation service does not work, although it is enabled in the settings. I'm attaching my current EFI, it might be useful to someone... EFI_HP_Z2_G5.zip
  2. Removed renaming EH01, EH02. Added USBToolBox.kext and removed XHCI-unsupported.kext And it worked! Ports work! Jake Lo, thank you for your help!
  3. Dell Optiplex 7090 MT Intel Core i9-10900 16Gb DDR4-2933 Intel UHD630, AMD Radeon RX 560 LG 4K Ventura 13.5 I made an EFI folder for the system on a Comet Lake processor, removed the CFG Lock, connected the disk with Mac OS Ventura installed from my old Dell Optiplex 3040 and I was able to boot, but with one very annoying problem that makes using my new hackintosh impossible, it does not work USB ports. I formed my own USBmap.kext, but it did not help, I tried to boot using USBInjectAll.kext but also without success... Neither here on the forum, nor on the Internet, I could not find information on enabling USB ports on the Optiplex 7090. Please help to get the USB ports working. EFI_optiplex_7090.zip
  4. I found information on the forums that people had this problem treated by clearing all the files in the /Library/Logs/DiagnosticReports/ folder But every time new files are created there, in my case: com.apple.WebKit.GPU_2022-11-28-184448_CZC147DCN8.wakeups_resource.diag.zip
  5. There are still a couple of problems that, if possible, I would also like to solve ... The first is the message "You shut down your computer because of a problem." countdown.. Second, when the computer shuts down, the image first disappears, and then a stuck desktop picture appears ... then the computer turns off. Third, I know for sure that I updated OpenCore to version 0.8.6, however, on the initial bootloader screen, I see that version 0.8.4 ... Any thoughts on how to fix this?
  6. Hallelujah! This worked for me! Thank you so much!
  7. However, the RX 560 fired up without any extra crutches... but I was asking about integrated graphics...
  8. Dell Optiplex 3040 MT, Core i5-6500, 16Gb DDR3-1600, Intel HD530, MSI RX 560 4Gb, LG HDR 4K, Ventura 13.0.1, OpenCore 0.8.6 I upgrade my hackintosh from Monterey to Ventura. The ZHOUMIN LU config on github was taken as a basis. After the update, support for hardware decoding disappeared. Can someone tell me how to return decoding support, or has Apple removed support for SkyLake processors in Ventura and, accordingly, decoding support? EFI.zip
  9. Unfortunately it didn't help, everything remained the same...
  10. Yes, all this was taken completely from the config that I found. I am connecting the monitor via DisplayPort. IOReg attached. ioreg.zip
  11. I am using a DP-mDP cable. Changing the frequency does not help.
  12. Yes, I tried to solve this problem there as well, but I also did not succeed in this. But I really want to solve it... It seems to me that everything is in the monitor, more precisely, that MacOS does not receive the correct data about the capabilities of the monitor or receives, but not quite the correct data... In particular, MacOS indicates that a 61-inch monitor is connected, although in fact the U2718Q has only 27 inches. Can Hackintool be of any help? In particular, the "Displays" section. What should I specify in this window?
  13. HP Z2 G5 SFF, Core i5-10500, 16Gb DDR4-2666, Intel UHD630, Ventura 13.0, DELL U2718Q OpenCore 0.8.5 I installed macOS Ventura on top of Monterey, the config was taken from some forum, everything works, except for the correct, not deformed image on the monitor. I tried to turn on HIDPI mode via one-key-hidpi, HiDPI mode turn on, but the image became vertically squished. The computer is connected to the monitor via DisplayPort. Please help with advice on how to solve the problem of a flattened image. EFI.zip
  14. In my case, updating the bootloader to 0.7.4 helped, also updated lilu, VirtualSMC, WhateverGreen, then I updated OpenCore Configurator to the latest version, opened my config.plist in it and just clicked save, only after that I was able to complete the update .. ...
  15. Hi everyone! Another successful Big Sur installation! Dell Latitude 3510, Core i5-10210U, 16Gb DDR4-2666, Intel UHD 620, Big Sur 11.5.1, Dell U2718Q 4K + Docking Station Dell WD19 130w What works: Built-in screen Wi-Fi (due to the use of AirportItlwm.kext, but it is unstable, quite often loses connection and work only at 2.4 GHz) USB 3.0 ports USB-C port Keyboard Sound to built-in speakers Touchpad (reacts to pressing from the left and right as pressing the right mouse button, does not perceive scrolling with two fingers at the same time) HDMI up to 4K resolution (It is strange that in the window about the system, the graphics processor is defined as Intel UHD Graphics 617, although in fact it is Intel UHD Graphics 620 that is installed in this processor.) Handoff What does not work: USB-C DisplayPort Microphone Built-in Camera Jack 3.5 (the sound in the headphones rattles) Help me get what didn't work ... PS config2.plist - the image output works in the maximum resolution 2560x1440 (HDMI, USB-C) config.plist - output in 3840x2160 resolution works, but only via HDMI, there is no image through a monitor connected via USB-C. EFI.rar
  16. It works! Everything is fine! Thank you very much for the help!!!
  17. I used USBInjectall.kext. Without rolling back, I won't be able to generate USBPorts.kext?
  18. After installing the 11.3 update, all USB ports stopped working, now I also received a crossed out Bluetooth icon and I can not connect bluetooth devices now. I have updated opencore to the latest 0.6.8, updated lilu, virtualsmc, applealc but it didn’t help restore USB and bluetooth to work. Tell me, is there a working method to return the devices to working mode?
  19. I apologize for the long silence. I tested config.plist from attachment. This time the laptop booted successfully! Sound without distortion! The touchpad works! The card reader is working! USB-C / Displays Port works! HDMI works! The only problem is there is no 4K video output! I connected a laptop to a monitor via USB-C and to a TV via HDMI. What can be done to get 4K resolution?
  20. Copied to a USB flash drive, tried to boot from it, kernel panic ... Screen Log OpenCore
  21. Hi everyone! I have successfully installed Big Sur on my laptop. Dell Latitude 5580, Core i5-7440HQ, 16Gb DDR4-2400, Intel HD630, Big Sur 11.2.1, LG 32UL950-W 4K What works: Built-in screen Wi-Fi (after replacing the stock card and modifying the seat ->) USB 3.0 ports USB-C port Keyboard Sound to built-in speakers What does not work: USB-C DisplayPort HDMI port Touchpad Jack 3.5, the sound in the headphones rattles Can you help me turn on the touchpad, fix the sound in the headphones, make the image output via HDMI and USB-C DisplayPort? EFI.zip IOreg.zip
  22. Yes, I heard about it ... If I'm not confusing anything, should I enter some commands using modGRUBShell.efi? Now my system allocates 1536 MB, tell me what commands should I enter and what other changes should I make to my config.plist? PS Sorry for my English ...
  23. Dell Optiplex 3046 SFF, Core i5-6500, 16Gb DDR4-2400, Intel HD530, 2560x1440, Big Sur 11.1, DELL U2718Q 4K I installed Big Sur, the config was taken from some forum, everything works fine except for displaying an image at a maximum resolution of 2560 × 1440. The computer is connected to the monitor via DisplayPort. DELL U2718Q monitor supporting 4K output. Windows on the same computer outputs 3840x2160 60Hz. Can someone help to get to output 4K resolution in Big Sur? EFI_OC.zip ioreg.zip
  24. BCM94360CS2 + NGFF M.2 Key A/E Adapter. I had to cut a little plastic with a hot flat-blade screwdriver, but in the end it works just fine!
×
×
  • Create New...