burzlbaum

Yehaa! You are the best! Now I can start the installation, I guess now I can continue with the very good documented Post-Install Stuff. Thanks a lot!

Hey Jake, its me... again xD I tryed a lot of different things the last hours. I used the new DSDT and Config u gave me but kept the SSDTs in patched. I think I've never came that far (but its more guessing then knowing). Suddenly the Display turned black and nothing more happened it was so fast I couldn't take a picture. Did a movie and took a screenshot of the last sec. Hopefully you can read something out of it? Thank you very much!

If I use E7470_1.17.5_HS.zip or the alternative instead of the 7270 I get this error. maybe this information is helpful?

Thank you very much! Depending on which USB port I pick i get different errors. BTW i use a clean install stick and another stick for clover. Worked for me might this be a problem here? /edit I read your method to create the installation sticks. I usually use this command in terminal:

Hi Jake Lo! Im still at 17.5 but my origin Folder is attached. Thanks a lot! origin.zip

Hi there, first of all, im far away of being a nativ speaker so im sorry if my grammar or words are confusing. My setup is a little different of the one of Jake Lo. E7270 i5 6300U FullHD Touch IPS 8GB Ram DW1560 (changed and working in Win10) BIOS Update to 17.5 (btw. 18.5 is also available and marked as "important") I haven't done the BIOS MOD and was hoping I don't have to. Well if I try the 7270 Kext and DSDT Patched combined with the EFI Bootpack I get stuck. If I remove the SSDTs (and) DSDT I get to an KP very soon. I attached my origin DSDT.aml. Is here someone with the same Setup who can help me out? Thanks a lot! DSDT.aml.zip

@ecpowers thanks for ur reply! Thought i already tested so i tried the sahilsaids advice first @sahilsaid ur my hero it worked perfectly for me! Never heard about that issue but it worked... used in terminal diskutil corestorage revert /dev/disk1[/size] mounted EFI Partition and erased everything deleted EFI and EFI Backup Folders on the Harddisk restarted Installed Clover with the following settings: Install Clover in the ESP Bootloader/Install boot0af in MBR CloverEFI/CloverEFI 64-bits SATA Put config.plist, DSDT.aml, Kext Folders into the CLOVER Folder on the EFI Partition restarted worked

Update: I did a Bios Update from A06 or A08 (dont remember) to A23 and made a new USB Installstick, like i did them usually. Was able to Install, and know i do see my OSX SSD in Clover everytime i start with the Stick. But im still not able to get Clover booting the OSX SSD. I did every Step in Post-Installation and used the Bootflags Install Clover in the ESP Bootloader/Install boot0af in MBR CloverEFI/CloverEFI 64-bits SATA Install RC scripts on target volume Install Clover Preference Pane The EFI Folder is on the Harndrive and i put the config.plist and DSDT from the ZIP into it... also copied the kexts into 10.11 and Other. Any Ideas to get my Bootloader working?

Hi there! First of all, im not a native Speaker so im sorry if i can't explain my problems in an understanding way. Im new here because i've been told u are the best for Latitudes. I already use an hackintosh Desktop (very easy hardware) and an Lenovo G500. Both went well with a little help. Still far away of beeing "good" with Clover and the other stuff Well i decided to get my wife a Dell latitude e6420 (14" 1600x900 mit i5-2520M, HD3000, 16GB RAM) and im pretty sure i did everything as jake los Guide told me. I also used the Note 1 Information and set the Bios Settings to the recommended for e6220 Installation went well but after i tried to set the bootloader with Clover to the SSD the dell wont start (white "_" blinking on black screen). Shouldnt be a problem, maybe i set something wrong... i wanted to boot again with my stick and there was no SSD... only the Installation Stick, Recovery HD, Clover EFI and last bootet device... Never had that Problem on my other PCs (well they are UEFI) there were even the Windows Data Harddrives listed... Tried a few new installations - at my last i just did not set ANY bootloader and i got the same issue with my cloverstick. Any ideas? Thank you very much! burzlbaum