ss2sameer

@Lamcrkh516 what are the patches you applied to your DSDT?

@ Jake I have patched my DSDT before with many laptops. using the clover f4 option. but with 7510 I am unable to create a correct one. can you refer to me the correct guide. would like to disable Nvidia via dsdt for my lighter and battery usage. for M2000m have you tried with Inject NVIDIA=false, with IntelBacklight.kext in clover folder and AGDP fix. I got my M1000M working with web driver with these setting. Ideally it should work. I wanted M2000M but didn't go because of the budget. with M1000M i still get black screen at the end of boot. the login screen appears after i close the lid and reopen. this i has to do for only NVIDIA not Intel HD530.

I also tried updating the BIOS. same result with optimus switching.

@lamrckmh516 1. Set layout-id to 1 ? In where. that you need to do in config , under devices/audio inject field, 2. Repair permission and rebuild cache: do like above command im terminal ? yes. 3. You'll need the vanilla AppleHDA in /S/L/E ? ​you don't need to bother as you have patched your original AppleHDA yet. 4. Remove voodooHDA and AppleHDADisabler ? You don't need to bother as you haven't installed VOODOO sound. have you? ​and yes as Jake Lo pointed out you need to copy AppleHDA_ALC293.kext into to /Library/Extensions and run those commands again. you should be good to go if you are using JAKE Lo Config file. Hope it helps

hi, installing win won't change your DVMT you are getting black screen?

@Jake Lo I have always got better results with NVIDIA QUADRO Cards without INJECT NVIDIA=flase, any particular reason you have kept it true?

@lamcrkh516 , what happens if you boot with graphics switching on. and GraphicsEnabler=No, and keep inject intel = true also try with wrong config id of intel hd530 i.e. try 0x0191b00 or any thing else. ​you can have the right id later.

I would prefer to install mac OS X first. use one of the graphics enabler to reach the login screen. or dummy id for your ATI card. try AGDP fix app. intelbacklight kext. and once you reach login screen. keep your screen sharing on. hope you have another OS X working on another system.

Great! The closing of lid and opening i have to do with NVIDIA too.

lamcrkh516, I tried booting with my USB drive(El captain) with intel hd530 enabled. I had to do two things in boot options of clover to reach the installer screen 1. Disable Inject NVIDIA (for your case ATI), let inject intel be enabled ​2. use GraphicsEnabler=No otherwise i would get reboot

Jake Lo Did you get NVIDIA M2000M QE/CI?

clover Sierra USB Making Procedure Download Clover_v2.3k_r3961.zip Make sure you have the MacOS Sierra beta app present in your applications folder. Open Disk Utility and format your USB flash drive as Mac OS Extended Journaled. While formatting name the USB as Sierra (if you prefer another use that but remember it then) Open Terminal (Applications > Utilities > Terminal) and paste the below command sudo /Applications/Install\ 10.12\ Developer\ Preview.app/Contents/Resources/createinstallmedia –volume /Volumes/Sierra –applicationpath /Applications/Install\ 10.12\ Developer\ Preview.app –no-interaction Terminal will ask if you wish to continue, just type “Y†for yes and wait for the process to complete Once done, open the Clover installer and install the bootloader onto the USB you just created During the installation you need to select the USB where you want to install and before installing click the customise button and check the boxes of : Install for UEFI booting only, under Drivers64UEFI tick OsxAptioFixDrv-64 and PartitionDxe-64 Once you have done all that click install and enter your password when asked for After the completion, Clover would mount the EFI partition. Copy the FakeSMC.kext to – EFI > Clover > Kexts > Others and 10.12 Your USB is ready.

And yes You were required to move the kext from 10.11 to 10.12 folder in the EFI I gave. (create that folder if absent)

I would say restart from making your installer pen drive and install latest ver of clover boot loader and remember to use OsxAptioFix2Drv

open the EFI partition of your installer pen drive and replace the EFI folder of your pen drive with the attached one. report exactly where it hangs if it fails EFI.zip

Have you installed the OS X or still at the installer stage?

I just tried the ApplePS2Controller.Kext from the boot pack. it works the best so far. so here is my updated clover kext folder Use all the kext in appropriate clover kext folder kexts.zip

Ideally create your own SMBIOS with wizard from Clover configurator. use the shake features a few time. if you iMessage and apple id works. your serial no is good to go.

with NVIDIA M1000M i had to use IntelBacklight.kext in clover folder and apply AGDP fix to avoid the black screen at the end of boot. still get black screen but closing the lid and opening it back gives me the login screen after the above fixes. Some times it works fine. don't know how to get rid of this problem. Hope this helps

hi to install El Captain use the attached config file and kexts in clover bootable pen drive. you'll will be able to boot fine and be able to install. will require an external mouse. keep switchable graphics off. I have installed elcaptain in three different 7510 using the above method without any problems. once OS X is installed, install the appropriate NVIDIA web driver and use nv_disable=1 without it. you should be fine. if you use my config file. kindly create your own SMBIOS serial no. Hope this helps clover_pendrive.zip

Hi Any particular advantage or disadvantage of upgrading to Sierra? Thunderbolt/USB3?

Sound works Now thanks Headphone out doesn't show up and Doesn't work.

AppleHDA_ALC293 still not working. ​Initially i thought it was working, but there was a copy of voodohda kext in S/l/E here is the updated config file config.plist.zip

Can u explain the steps to use AppleHDA_ALC293 ​I tried but couldn't get any audio. still using voodoo

here is the file again config.plist.zip