Search the Community

Hi All, I have an issue, when i plug in HDMI cable, my laptop screen not show everything, but external screen is show ok. I do not why?, Please can you help me fix this, . i have use guide to install, everything is working ok, but when i plugin HDMI cable it is working not correct : DELL LATITUDE E5470 CPU: Core i5 6440HQ 2,6GHz Intel Graphics 530 Full HD 1920 x 1080 Thanks All SO MUCH

Dear all experts, For several weeks now I’ve been trying to setup a Samsung NP900X4D-A01ES with dual boot Win7 and ML 10.8.5. I started as a total newbie, with no previous programming backgroung, and I have learnt a lot through the many posts I have read. Finally I managed to install and run ML 10.8.5 with reasonable success. I got wifi working (I bought an USB realtek wifi dongle) BUT no QE/CI support for the HD4000, no power management, no processor optimization, no Fn keys, no sleep/hibernate, no battery indicator, etc….. I soon realized the importance of optimising my system and began to investigate on solving the graphics acceleration issue. Being a noob, you can’t imagine the amount of hours I have spent in this process with no success (except for what I have learnt). It has become an obsession to finally conclude that my lack of in depth knowledge is blocking me to make any step forward. So… I am forced to request the help of the experts here, to whom I am already very grateful for what I have learnt from you. This is what I have worked up to now. As you know the bios of the NP900 series does not allow to set the graphics memory size so I tested every way and every configuration as shown below. 1- I have tried using the key HD4000PlatformId=[0 to 11] with no luck. 2- Then I tried with injecting the bootloader using the key “device-properties†in org.chameleon.Boot.plist with the EFI string I extracted with the help of gfxutil. No luck. 3- Then I though that the only solution was to patch the dsdt.aml directly. So I extracted my dsdt and ssdt files and used DSDT Editor to add the _DSM method under IGPU device. I have tested “AAPL,ig-platform-id†with every combination from 01660000 to 0166000B (except for those with 0162000y and y=5,6,7). No luck either. (by the way, I replaced GFX0 with IGPU and also added the DTGP method at the beginning of the dsdt file. There seems to be no difference in using GFX0 or IGPU). 4- Then checked the dsdt.aml file include in the EDP bootpack for NP900X4C and I realized that the line “AAPL00,DualLink†was not included in my dsdt. I copied it and retried again testing with different values for “AAPL,ig-platform-idâ€. No luck at all; always black screen except for values ending 0A and 0B (screen with clock stopped). However this time I used screen sharing and I could see that ALWAYS, no matter the value of “AAPL,ig-platform-idâ€: a) the OS boots perfectly, no matter what you see in the local screen. AppleIntelHD4000Graphics.kext and AppleIntelFramebufferCapri.kext are loaded, c) System info reports an HD4000; sometimes with a total VRAM=384 Mb, others with VRAM=512 Mb. It depends on the value “AAPL,ig-platform-idâ€. d) System info reports no display attached So… what else can I do? I have read that “in the case of people getting no internal display on some id and ONLY internal display on others, they need to hack an id connector table that contains both the ones displays get detected on.†Well… I’ve been digging in the web but I still don’t know how to do this. Will you pls help? I am attaching my system config files just in case you may need to have a look at them. Any idea that can help me on how to proceed will be very very much appreciated. Thank’s in advance, Matt. EXTRA_files.zip DSDT,SSDT - ORIGINAL.zip IORegistry files (from IORegistry Explorer).zip DSDT - SSDT ACPI (from AIDA64).rar EDIDViewer Output.rar