Search the Community
Showing results for tags 'memory'.
System specs: Dell optiplex 3050 SFF Core I5 6500 (6th gen)/3.2 ghz 4 core Intel 250 express Intel HD graphics 630 4gb DDR4 2400 mhz 128gb SSD Sata Realtek Ethernet Realtek HD audio/Intel display audio With 4gb memory system works fine, but after adding additional memory module 4 gb, system begins restarting progress in the moment of starting till the white progress bar appears . PS: Also anyone knows how to run internal audio ALC3234? EFI.zip
I apologize in advance for the length of this post... I suspect that may immediately turn off some people. Forgive me, but I tried to include all the relevant info I could. I have an Inspiron E1505 (aka 6400) running SL (10.6.8) and I'm investigating various hardware upgrades. I probably won't do ALL of these, but I'd like to know if there are any OS X compatibility issues with any of the proposed hardware upgrades before I start spending money. I'd also appreciate any "performance" related responses, ie "not worth it" or "definitely worth it" or hardware compatibility issues, ie "you can't put that CPU in an E1505"... unless of course those go outside the scope of this forum. My goal with these upgrades is obviously to increase performance, but also just to get some experience swapping out various bits of hardware and making them work with SL. So... borderline "performance" improvements may be worthwhile from a "just for the experience" point of view... depending on the upgrade cost that is. My current configuration (as best I've be able to determine) is: Model: Dell Inspiron E1505 System: MM061 (not exactly sure what this is) BIOS: A17 Chipset: Intel 945GM (FSB: 533MHz/677MHz) Motherboard: MD666 CPU: Intel T2050 (1.6GHz/2M/533MHz) Memory: 2GB (2 x 1GB) DDR2 800MHz (PC2-6400) SDRAM SO-DIMM 200 pin non-ECC Video: Intel GMA 950 (integrated) Display: WXGA Wireless: WLAN (Dell) 3900 802.11/b/g Hard Drive: 120GB Seagate Momentus 7200.2 (ST9120823AS) NOTE: I'm not exactly sure what the "MM061" is referring to. It's displayed on the boot screen just above the BIOS revision and I've seen it in relation to the BIOS itself (not the BIOS revision) and the model number and maybe a few other things. I suppose the model number makes the most sense. My optimal configuration (again, best I can figure) would be: ... Motherboard: YD612 (required for video upgrade - includes PCIe slot) CPU: Intel T7600 (2.3GHz/4M/667MHz) Memory: 4GB (2 x 2GB) DDR2 667MHz (PC2-5300) SDRAM SO-DIMM 200 pin non-ECC Video: ATI Radeon X1400 Display: WSXGA+ Wireless: Atheros AR5B91 802.11/b/g/n Hard Drive: some SSD 80-120GB I think my rough order/importance of the upgrades would be: wireless (cheap network performance increase) CPU (faster and 64-bit) memory (seems like it should help) motherboard/video (better video processing) display (increased resolution) SSD hard-drive Wireless - Based on one of the threads in the R&D forum it looks like the Atheros AR5BXB112 and Dell DW1505 would also work OOTB with SL. I listed the Atheros AR5B91 because I assumed it would have the same/similar 802.11n performance but wouldn't cost as much (I haven't priced any of them yet). If that's an invalid assumption, please let me know. For reference, my current wireless router is a "D-Link 655 Xtreme N Gigabit" and a "Hawking 300N Ranger Extender (HWREN1)" which helps on one side of the house. I don't plan to replace either of those any time soon, so whichever wireless card works best from a compatibility/price/performance point of view is probably how I'd like to go. CPU - Apart from the performance increase I assume I'd see by going from a T2050 to a T7600, I'm hoping I'd be able to run 64-bit SL. I've run into some software packages that only provide 64-bit versions, so I was hoping the T7600 would solve that issue. If there's some reason I won't be able to run 64-bit SL with the T7600 please let me know. Memory - I'm assuming there's no point in going to PC2-6400 (800MHz) memory since the FSB for the Intel 945GM only supports up to 667MHz. Also, I'm assuming with the T7600 cpu @ 667MHz, it would be optimal to have the memory match that? Also, the E1505/6400 doesn't "officially" support 4G of memory, but I've seen several references to people saying it works although you may only be able to see 3.2G. I'm not sure if the 3.2G limit is hard or depends on the chipset and/or CPU and/or OS being used. Most of the discussions I saw related to Windows. If anyone can clarify what I should expect with the Intel GMA 945 chipset and T7600 (64-bit) CPU and SL, I'd appreciate it. Video Card - From what I understand, in order to upgrade the video, I would need to replace the motherboard with one that includes a PCIe slot (YD612). Assuming I did that, I have 3 options: the ATI x1300, the ATI x1400 or the NVIDIA GeForce Go 7300. From what I've read, the ATI x1400 is better then the NVIDIA even though the NVIDIA was originally a more expensive add-on. Hard Drive - The SSD drive may be one of the better upgrades from a performance point of view, but from an "experience" and cost point of view it's pretty low (ie, easy to do and costs a lot). I haven't really looked that much at SSD drives, so I may find I can get one cheaper then I thought. As mentioned at the top... my primary goal in posting this on the OSXLatitude site is to verify OS X compatibility. But I'd appreciate corrections to any assumptions I've made about hardware compatibility and/or performance expectations. Thanks for any help.
Dear D630 users, I hope someone here already has some experience on using a Flash Cache Module. Is it working with OS X? Is there some configuration need, maybe it is even totally unsupported. AFAIK it was made to support Windows Vista's ReadyBoost Technology, so I speculate it needs some driver (software) support. Since I am interested in squeezing the last bit of performance out of my good old D630 I am interested in buying such a card. And maybe, in case of lacking OS X support, I am also interested in programming a Kext for OS X to support the flash cache module if their are some people despite me interested in. So I would give it a try, and some testers would also be great. But before I just wanted to get some feedback on this topic and OS X. Thanks in advance