Hattori Posted May 6, 2018 Share Posted May 6, 2018 Hello, i am following this guide but can not get into the installation screen, it's stopping at this screen https://i.imgur.com/tK0oAhI.jpg Can you guys please help me to fix. I've attached origin folder. My specs: Latitude 5480 Intel Core I7 7820HQ Intel HD Graphic 630 (no discrete graphics) 16GB DDR4 2400Mhz 256GB Toshiba NVMe M.2 SSD BIOS version 1.9.3 origin.zip CLOVER.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 6, 2018 Moderators Share Posted May 6, 2018 Try this Config config.plist.zip Link to comment Share on other sites More sharing options...
Hattori Posted May 7, 2018 Author Share Posted May 7, 2018 Thank @Jake Lo, with the new config.plist, it's showing another error https://i.imgur.com/PggL1Tx.jpg Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 7, 2018 Moderators Share Posted May 7, 2018 Ok, patched files from your Origin folder. Replace folder into /EFI/Clover 5480_v1.9.3.zip Link to comment Share on other sites More sharing options...
Hattori Posted May 7, 2018 Author Share Posted May 7, 2018 Great, thank @Jake Lo, I have it installed and typing on it now. There is few more issues: - Multi-touch does not work with the trackpad, single touch and button do. - No sound. - No HDMI output, if I hot plug HDMI cable, the computer will be freezed, i will have to press and hold power button to turn it off and turn on again. - SD card reader does not work. How I can get HWMonitor software to display information about CPU temp, CPU fan speed, SSD temp and other information? Currently it's only showing internal battery information. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 7, 2018 Moderators Share Posted May 7, 2018 @Hattori There is few more issues: - Multi-touch does not work with the trackpad, single touch and button do. Correct, limited support for now, you can experiment it yourself here regarding I2C controllers I don't have the hardware to test or experiment it myself - No sound. Try the new Config, moving layout -id from 56 to 13 - No HDMI output, if I hot plug HDMI cable, the computer will be freezed, i will have to press and hold power button to turn it off and turn on again. Try new Config, added HDMI patch for HD630 - SD card reader does not work. No support from now, but there's an early development here - How I can get HWMonitor software to display information about CPU temp, CPU fan speed, SSD temp and other information? Currently it's only showing internal battery information. Add the following kexts to /EFI/Clover/kexts/Other: FakeSMC_CPUSensors, FakeSMC_ACPISensors, FakeSMC_GPUSensors, & FakeSMC_LPCSensors config-HDMI.zip Link to comment Share on other sites More sharing options...
Hattori Posted May 7, 2018 Author Share Posted May 7, 2018 Thank for quick response @Jake Lo So after applying config-HDMI.zip, it's not freezed anymore, but HDMI was still not work, and audio neither. I ended up with removing FakePCIID_Intel_HDMI_Audio.kext from /L/E, rebuild kext cache and reboot. Surprise, both HDMI and audio works correctly after that . Do you think it will cause any further issues if I don't install FakePCIID_Intel_HDMI_Audio.kext? HWMonitor is now showing temps but not CPU fan speed, any way to get that information displaying? I am opening only Safari with 4 tabs, all of CPU core temps are above 50°C, is that normal? It seems battery level is dropping a bit quickly, anyway to know that power management system has been installed correctly? Update: found another issue: sleep and wake don't work. It actually can go to sleep, but can not wake up Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 7, 2018 Moderators Share Posted May 7, 2018 No, don't need FakePCIID_Intel_HDMI_Audio if it's working. For powermanagement, disable Hibernation and generate SSDT.aml. See post Installation here No idea how to get CPU Fan status. Try Googling Link to comment Share on other sites More sharing options...
Hattori Posted May 8, 2018 Author Share Posted May 8, 2018 @Jake Lo, thank you, I've disabled Hibernation, generated and copied SSDT.aml but weak up still does not work. Any idea to fix it? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 8, 2018 Moderators Share Posted May 8, 2018 You mean Wake Up does not work like blank screen? Could be an EDID issue...try this Link to comment Share on other sites More sharing options...
Recommended Posts