小麻花 Posted January 11, 2019 Share Posted January 11, 2019 Hello! I was able to install Mojave 10.14.2 on my E6430, but I have some problems with USB port. You can look at these pictures. The first photo is on Windows 10，it has USB3.0 and 2.0 ,but USB2.0 is on 7 Series ,but 3.0 is not on 7 series. the second picture is on mojava 10.14.2 I know that 10.14 limit numbers of usb ,but I don't think it caused it。If you have the same problem and you have sorted it. if You can reply to me，I will thank you very much。 Link to comment Share on other sites More sharing options...
小麻花 Posted January 11, 2019 Author Share Posted January 11, 2019 I can see four USB port on My computer ,that only one USB2.0 can be used, the othes USB can't be used. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 11, 2019 Administrators Share Posted January 11, 2019 You need to inject "Darwin" in your DSDT to get USB3 controller recognized. Thereafter, all you'll need will be Rehabman's FakePCIID + FakePCIID_XHCMux to enjoy USB port multiplexing. I would strongly suggest you use the Clover pack available in JakeLo's installation guide (available in the Guides section obviously). Link to comment Share on other sites More sharing options...
小麻花 Posted January 11, 2019 Author Share Posted January 11, 2019 5 minutes ago, Hervé said: 您需要在DSDT中注入“Darwin”才能识别USB3控制器。此后，您只需要Rehabman的FakePCIID + FakePCIID_XHCMux即可享受USB端口多路复用。 Can you give me some tutorial links?if you are not busy Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 11, 2019 Administrators Share Posted January 11, 2019 Please, no need to quote messages you directly reply to, especially if characters get changed to Chinese symbols... Look at the DSDT available in the packs posted here or here. If you don't use those packs, adjust your own DSDT accordingly. Using MaciASL app, look for "Darwin" and you'll see. Link to comment Share on other sites More sharing options...
小麻花 Posted January 11, 2019 Author Share Posted January 11, 2019 OK Thank you reply, Link to comment Share on other sites More sharing options...
Recommended Posts