leaf389 Posted November 18, 2019 Share Posted November 18, 2019 try this solution: https://github.com/xzhih/one-key-hidpi choose option 2: Enable HIDPI (with patch) this got the pink tint issue fixed for me first try. Could someone help me with sound? Got literally the same system (but with an i5 7500T) Link to comment Share on other sites More sharing options...
ghostinthemirror Posted November 18, 2019 Author Share Posted November 18, 2019 @Jake Lo Ashes to my head ... Attached the original output from Catalina with one correction: iMac 18,2 is completely unusable I had to take 18,1. CatalinaWithoutCons.ioreg Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 18, 2019 Moderators Share Posted November 18, 2019 @leaf389 can you post your Config file? Try layout-id =11 + AppleALC.kext @ghostinthemirror Try this Config config-HDMI.plist.zip 1 Link to comment Share on other sites More sharing options...
leaf389 Posted November 18, 2019 Share Posted November 18, 2019 @Jake Lo I opened a new thread for this: Link to comment Share on other sites More sharing options...
ghostinthemirror Posted November 18, 2019 Author Share Posted November 18, 2019 @Jake Lo Your last config brought no changes in result. lastconfig.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 18, 2019 Moderators Share Posted November 18, 2019 @ghostinthemirror did you rename the Config file to Config.plist or at least choose the new Config in Clover option? The reason is IOReg shows a difference serial # than the Config I uploaded with the changes. Link to comment Share on other sites More sharing options...
ghostinthemirror Posted November 18, 2019 Author Share Posted November 18, 2019 (edited) One little mistake ... con1 must be con0 con2 has to become con1 you had no con0 but con0 is HDMI ! Colors ok, HDMI sound works. You made my day and many thanks to Hervé for analyzing (some posts before) And leaf389 should read it, his audio problem ist solved also. Archiv.zip Edited November 18, 2019 by ghostinthemirror Attachment Link to comment Share on other sites More sharing options...
leaf389 Posted November 19, 2019 Share Posted November 19, 2019 I just tried like every Injection ID (3,11,13,15,17,18,21,27,28,30,31,99) still no audio. Clover zip attached. CLOVER.zip Link to comment Share on other sites More sharing options...
ghostinthemirror Posted November 19, 2019 Author Share Posted November 19, 2019 (edited) I dont hope that leaf389 has given up, My last postet configuration is absolutly stable (with sound !) BUT, when I try to wake up after sleep then I've a short activity blinking of the HD-LED and thats all. blach screen and no further activities. I've exactly to do two things to reanimate the machine: 1. Long press the power button until the cpu/systen fan turns off 2. Short press the power switch Power LED turns on and after a few seconds the machine turns completely off itself Now I can press power on and it boots normal and no hint that anything was going wrong. What happened? That's misterious. Can I fix this or is it true that it can't solved for Kaby Lake CPU and HD630 Intel graphics? Thanks for each helpful hint ------------------------------ Hm. have you used my complete clover and my config.plist for testing? The injection for Audio is 11 all other ID were more or less not successful. Have .you taken the same kexts from my clover upload and put it to kexts/other? Is the internal audio activated in the Dell bios? What Bios Version you use? What is about HDMI Audio? Greetings Lutz Edited January 5, 2020 by ghostinthemirror No wake after sleep Link to comment Share on other sites More sharing options...
Recommended Posts