adala Posted April 24, 2020 Share Posted April 24, 2020 How can I get past the +++++++ part and into booting on first round ? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 24, 2020 Moderators Share Posted April 24, 2020 @adala Make sure if it only have one memory stick, it is in the 1st slot Link to comment Share on other sites More sharing options...
adala Posted April 24, 2020 Author Share Posted April 24, 2020 I got the system to install and made clover on the boot drive, now the sound doesn't work and also wifi Those are my last two things to fix I tried to use the plist that was left that fixed the HDMI sound but it made my system turn off when booting into it at the home screen I edit my plist to add the ram into the SMBIOS so the system boots correctly Whats a good wifi card to swap out in this system for it to work Link to comment Share on other sites More sharing options...
cy.82 Posted April 24, 2020 Share Posted April 24, 2020 I have a 3050 Micro OptiPlex that I just cannot get to install Catalina. This is my first attempt at a Hackintosh build so I'm sure I'm doing something wrong. I've grabbed your posted configs and used them, however I just stay stuck on the black screen with the Apple logo. OptiPlex 3050 Micro i5-7500T @2.7 16GB RAM 256SSD Any help would be much appreciated, I'm at the point of giving up but would really love to see this working. CLOVER.zip Link to comment Share on other sites More sharing options...
adala Posted April 24, 2020 Author Share Posted April 24, 2020 I attached my EFI folder which I got working, you need to put your ram in the SMBIOS in clover configurator that way you won't get stuck then I used https://github.com/xzhih/one-key-hidpi choose option 2: Enable HIDPI (with patch) this got the pink tint issue fixed for me first try. I dont have internet working or sound at the moment EFI.zip Link to comment Share on other sites More sharing options...
cy.82 Posted April 24, 2020 Share Posted April 24, 2020 OMG thank you so much, it was the memory part that was causing my issues! I'm seeing a progress bar for the first time so that's something. Haven't done your fix to fix the pink issue, I'll try and understand that if needed. Thanks again! Link to comment Share on other sites More sharing options...
adala Posted April 24, 2020 Author Share Posted April 24, 2020 If you get internet or sound let me know Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 24, 2020 Moderators Share Posted April 24, 2020 Verify if your ethernet is enabled in the BIOS and that it's indeed a Realtek and not Intel For audio, you have layout-id = 31. Change it to 3, 11 or 13. 11 is made for an Optiplex, the rest are for laptops I believe. Link to comment Share on other sites More sharing options...
adala Posted April 24, 2020 Author Share Posted April 24, 2020 Thank you so much , I got internet and bluetooth working, wifi is no biggie using ethernet Glad this worked Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 24, 2020 Moderators Share Posted April 24, 2020 @adala What changes did you make to resolved both issues? How about audio? Link to comment Share on other sites More sharing options...
Recommended Posts