WalterWolf Posted May 4, 2020 Share Posted May 4, 2020 (edited) Hey folks, im trying for weeks to setup the following System under Catalina: https://support.hp.com/de-de/document/c05521606 i7 6700 with HD530 HP Lubin h270 Board 16gb DDR4 Corsair Vengeance 3000mhz Sandisk Extreme Pro 500gb NVMe Couple of 1tb HDDs Realtek RTL8161 Intel 3168NGW WLAN/BT - Which one I should get instead? Tryed Clover, Open Core and even OC N-D-K Fork. Cant get past Kernel Panic whilst booting from external OS Stick via Bootloader(s) Followed Github Vanilla Guides for Coffelake/Skylake and Compiled DSDTs as advised. Which Loader would u recommend? I can upload my work so far, if u tell me which u recommend. Thanx in Advance Edited May 4, 2020 by WalterWolf Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 4, 2020 Administrators Share Posted May 4, 2020 Let's stick to Clover... Post a zipped copy of your Clover EFI folder. And give us details of your BIOS settings. GT730 will have to be a Kepler model, not Fermi. And, obviously, the Intel wireless/BT card won't be supported. Link to comment Share on other sites More sharing options...
WalterWolf Posted May 4, 2020 Author Share Posted May 4, 2020 This GT730 is Fermi, so nevermind. Looking for a rx560 to replace it, after project is running Which m2 wlan/Bt will be supported ? 21:07 attached Efi EFI.zip Link to comment Share on other sites More sharing options...
WalterWolf Posted May 4, 2020 Author Share Posted May 4, 2020 (edited) How to post Logs? OC generates them and makes it easy shareable Edited May 4, 2020 by WalterWolf Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 4, 2020 Administrators Share Posted May 4, 2020 You would post logs the same way you posted your EFI folder. Re: Wireless card, please consult our FAQs and Wireless sections. I've made several changes and corrections to the Clover config.plist. Try the attached using at least Clover r5107 if you're installing 10.15.4. config.plist.zip On the kext front, I see only 1 x major mistake: you're injection FakeSMC + VirutalSMC. You only use one or the other. I would suggest you start with FakeSMC before you eventually try or move to VirtualSMC. KP seems to show a last entry with "still waiting for root device" which suggests USB-related issue. Could you take a dump of your ACPI BIOS tables at Clover main menu by pressing F4? Tables should then go to the ACPI/origin folder of your USB installer. Post a zip copy of the folder afterwards. 1 Link to comment Share on other sites More sharing options...
WalterWolf Posted May 4, 2020 Author Share Posted May 4, 2020 I used the via Asl Compiled dstdt which were provided for Opencore skylake. is that wrong ? im getting crazy now with swapping cpu 5x an hour. will wait for my 6400 to arrive will follow your orders and reply tomorrow night Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 4, 2020 Administrators Share Posted May 4, 2020 I don't think you should mix stuff from OC and Clover. I've no experience with OC so if that's the route you wish to pursue, I'm afraid I won't be of much help. For the rest, you've lost me. Link to comment Share on other sites More sharing options...
WalterWolf Posted May 4, 2020 Author Share Posted May 4, 2020 Ok, then I’ll clean out my memory off OC and Check what Maybe from there and remove it. I don’t wanna loose u Link to comment Share on other sites More sharing options...
Recommended Posts