despedros Posted June 4, 2020 Share Posted June 4, 2020 Hi guys, this is my first time I try to get an hackintosh. I read several guides and this thread a lot of time! I have Dell Optiplex 3040 Micro: i5-6500T 8GB RAM 240GB SSD HD 530 1. RAM is in the upper slot 2. To boot I inserted USB stick in the USB 2.0 port 3. BIOS configuration think is right My installation stop after +++++++++++++++++++ I use a USB receiver for both keyboard and mouse In attachment the error and the EFI folder Can anyone help me to fix the error? EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 4, 2020 Moderators Share Posted June 4, 2020 You're installing Catalina, you'll need a new set of USB Port limit patches. I've included in the attached Config file. Also I don't know where you got the kexts from, but it's a total mess. Delete everything in /kexts/Other but leave the following kexts only: AppleALC CodecCommander IntelMausi Lilu USBInjectAll VirtualSMC WhateverGreen SATA-100-series-unsupported (might be optional) config.plist.zip Link to comment Share on other sites More sharing options...
despedros Posted June 4, 2020 Author Share Posted June 4, 2020 Thank you very much. I done adjustment to my kext folder but the problem still remain. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 4, 2020 Moderators Share Posted June 4, 2020 Forgot to add the embedded controller patch required by Catalina config.plist.zip Link to comment Share on other sites More sharing options...
despedros Posted June 4, 2020 Author Share Posted June 4, 2020 Thank you very much again! Replaced again with new file but the problem still remain. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 4, 2020 Moderators Share Posted June 4, 2020 Set BIOS to load Default. Apply, reboot and set BIOS to the following: UEFI enable AHCI enable Secureboot disable Link to comment Share on other sites More sharing options...
despedros Posted June 4, 2020 Author Share Posted June 4, 2020 Thank you again! BIOS restored to default then setted like you wrote: same result, the problem still remain Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 4, 2020 Moderators Share Posted June 4, 2020 I've seen this when installing Calatina 10.15.4 with older version of Clover, but from your log file, it shows you're running latest v5118. Did you replace the entire clover from another source after install Clover? Go ahead and reinstall Clover on top, it won't overwrite the Config, ACPI or Kexts folders. It'll just update the drivers. Then try again. Link to comment Share on other sites More sharing options...
despedros Posted June 4, 2020 Author Share Posted June 4, 2020 I've executed the procedure, unfortunately problem still remain. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 4, 2020 Moderators Share Posted June 4, 2020 Have you tried different USB ports? Link to comment Share on other sites More sharing options...
Recommended Posts