Lumeaalex Posted August 2, 2020 Share Posted August 2, 2020 Hello! Recently, I’ve installed a BCM94360CS2 +Adapter into the WWAN slot on my E7440, remapped the USB ports, and upgraded to Jake Lo’s preconfigured Opencore 0.6 folder. Unfortunately, My Laptop instantly wakes up, and it is no longer hibernating. Ive correctly set my WWAN USB Map, labeled it as internal, and I made sure the USB port was listed as 255 for an internal port inside the USB port kext. Strangely, the machine will go to sleep just fine when I’m using Clover with the exact same USB Port Map. Any help would be greatly appreciated. Thank You. Attached Below is my EFI and my USB port map EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 2, 2020 Moderators Share Posted August 2, 2020 Disable wake on WLAN/WWAN/LAN in the BIOS Link to comment Share on other sites More sharing options...
Lumeaalex Posted August 2, 2020 Author Share Posted August 2, 2020 It is disabled. In Clover, my USBPort Kext works perfectly, and the machine hibernates normally. I'd rather prefer to stay on Opencore because I couldn't get my USB-HID touchscreen to work on Clover. Trying USBInjectall with a custom SSDT on Opencore doesn't solve the issue either. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 2, 2020 Moderators Share Posted August 2, 2020 run this log show --style syslog | fgrep "Wake reason" Link to comment Share on other sites More sharing options...
Lumeaalex Posted August 2, 2020 Author Share Posted August 2, 2020 After running this log in terminal, the hibernation issue seems to pertain to the network card. When I remove the BCM94360CS2 from the WWAN slot, the laptop hibernates normally. % log show --style syslog | fgrep "Wake reason" 2020-08-01 18:06:13.786905-0700 localhost powerd[53]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 18:06:36.406164-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:06:36.406166-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:11:15.735933-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 18:11:37.697361-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:11:37.697363-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:32:32.151190-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 18:56:35.507207-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 18:57:00.496745-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:57:00.496747-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:58:40.580462-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 18:58:40.580464-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:06:16.389622-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 19:06:37.014498-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:06:37.014501-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:09:54.213466-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 19:10:13.328588-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PBTN LID0 (User) 2020-08-01 19:10:13.328590-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: PBTN LID0 (User) 2020-08-01 19:25:21.393547-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 19:25:43.381747-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:25:43.381749-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:36:18.943119-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 19:36:38.891178-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:36:38.891181-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:49:58.889321-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 19:50:17.648435-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:50:17.648439-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:52:56.623112-0700 localhost powerd[98]: [powerd:sleepWake] Wake reason: "<private>" identity: "<private>" 2020-08-01 19:53:34.441330-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) 2020-08-01 19:53:34.441333-0700 localhost kernel[0]: (AppleACPIPlatform) AppleACPIPlatformPower Wake reason: LID0 PXSX (Network) Link to comment Share on other sites More sharing options...
Lumeaalex Posted August 2, 2020 Author Share Posted August 2, 2020 Here are my problem reporting files...debug_6345.zip IORegistry Dump.ioreg Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 2, 2020 Moderators Share Posted August 2, 2020 Try changing the change Method (GPRW,2,N) to XPRW, pair with SSDT-GPRW.aml patch Count from 1 to 0 Link to comment Share on other sites More sharing options...
Lumeaalex Posted August 2, 2020 Author Share Posted August 2, 2020 By the looks of it, the patch is already applied in the config.plist. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 2, 2020 Moderators Share Posted August 2, 2020 Change Count from 1 to 0 Link to comment Share on other sites More sharing options...
Lumeaalex Posted August 2, 2020 Author Share Posted August 2, 2020 I changed the count from 1 to 0 but it still won't hibernate. It immediately wakes up after sleeping. I also tried to disable the sleep proxy client but the issue still persists. Link to comment Share on other sites More sharing options...
Recommended Posts