adam4444 Posted February 26, 2022 Share Posted February 26, 2022 hey, i'm trying to boot macos monterey on my dell latitude 5490 but the trackpad isn't working and also the installation isn't detecting my samsung nvme. any help will be appreciated EFI.rar Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 26, 2022 Moderators Share Posted February 26, 2022 what model is your NVMe? Try changing ScanPolicy in config file to 0 Please note that some are not supported. Check out Dortania's guide Link to comment Share on other sites More sharing options...
adam3333 Posted February 27, 2022 Share Posted February 27, 2022 Thanks for replying. The nvme(PM871) is working now after following your recommendations but had no luck with the trackpad Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 27, 2022 Moderators Share Posted February 27, 2022 I'm surprise your keyboard is even working at all with your current setup. You don't have voodoops2controller No smcbatterymanager for battery status you have way too many different kext for ethernet, you'll need to determine which you actually need Knowing your hardware is a start you're using the wrong smbios for a laptop Here, give this a try for the touchpad Replace the config file, add the ssdt* to ACPI folder, add the 3 kexts to kexts folder touchpad.zip Link to comment Share on other sites More sharing options...
cfoote2667 Posted March 13, 2022 Share Posted March 13, 2022 Try the AlpsHID kext for the touchpad, worked on my 5310. https://github.com/blankmac/AlpsHID Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now