Newest EDP Installer works but.....

[daspazz]

The newest EDP installer works as it loaded the SVN stuff and brought up the WebPage for EDP.  It didn't leave my /Extra folder empty.  But it seemed to crash on the AppleHDA.kext install for the D830.  The system locked up and I had to hard boot with my ML myhack install key drive so I could try and fix it.

 

Rerunning install via edptool.command from /Extras and being more specific with my build this time.  Seems to be working better as I am typing this as it works.

 

More later...........

 

Spelling error see attached.....

[Hervé]

Try VoodooHDA (v2.8.1 to v2.8.4) instead of AppleHDA: remove AppleHDA + STAC9205 + IOAudio + LibKern kexts and replace by VoodooHDA + HDADisabler then re-run myFix (full).

[daspazz]

 

 

 

Try VoodooHDA (v2.8.1 to v2.8.4) instead of AppleHDA: remove AppleHDA + STAC9205 + IOAudio + LibKern kexts and replace by VoodooHDA + HDADisabler then re-run myFix (full).

Are those part of the EDP installer? Im still learning the new EDP. in /S/L/E or /E/E?

 

Edito: I found STAC8205 + IOAudio + AppleHDA in /E/E but not the others.

 

Where do I get the HDADisabler kext from? I can probably get the Voodoo???.kext from multi beast.

 

Edito due: I removed those three and now audio works and no KPz!! W00t W00t!!!!

 

Never mind g00gle is my friend, found the VoodooHDA.kext on OSx86; nothing on the HDADisabler.kext

 

 

I think this is the EDP myfix error from earlier;

 

 

Process: myfix [513]

Path: /usr/sbin/myfix

Identifier: myfix

Version: ???

Code Type: X86-64 (Native)

Parent Process: sudo [511]

User ID: 0

 

Date/Time: 2013-06-22 15:44:32.519 -0500

OS Version: Mac OS X 10.8.3 (12D78)

Report Version: 10

 

Crashed Thread: Unknown

 

Exception Type: EXC_BAD_ACCESS (SIGSEGV)

Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5f3ffff8

 

Backtrace not available

 

Unknown thread crashed with X86 Thread State (64-bit):

rax: 0x0000000000000c08 rbx: 0x000000000000003b rcx: 0x0000000000000000 rdx: 0x000000000000003b

rdi: 0x000000010180d800 rsi: 0x00000001000061a7 rbp: 0x00007fff5f400050 rsp: 0x00007fff5f400000

r8: 0x0000000100004781 r9: 0x0000000000000002 r10: 0x0000000000000c08 r11: 0x0000000000000246

r12: 0x0000000100b66b28 r13: 0x00000001000061a7 r14: 0x0000000000000810 r15: 0x000000000000003b

rip: 0x0000000100b15305 rfl: 0x0000000000010287 cr2: 0x00007fff5f3ffff8

Logical CPU: 1

 

Binary images description not available

 

 

External Modification Summary:

Calls made by other processes targeting this process:

task_for_pid: 0

thread_create: 0

thread_set_state: 0

Calls made by this process:

task_for_pid: 0

thread_create: 0

thread_set_state: 0

Calls made by all processes on this machine:

task_for_pid: 128

thread_create: 0

thread_set_state: 0

[Guest]

do you know what a Kext file is? use a utility to install VoodooHDA (v2.8.1 to v2.8.4) and remove AppleHDA + STAC9205 + IOAudio + LibKern. after that boot my hack ==> myfix ==> select full and select the hard drive you installed on. Wait a while and get a snack and you are done. Message me if you run into trouble

[daspazz]

do you know what a Kext file is? use a utility to install VoodooHDA (v2.8.1 to v2.8.4) and remove AppleHDA + STAC9205 + IOAudio + LibKern. after that boot my hack ==> myfix ==> select full and select the hard drive you installed on. Wait a while and get a snack and you are done. Message me if you run into trouble

 

Thanks MacMacMac, but I got it sorted.  And yes I know that a kext file is a Mac driver equivalent.

 

I basically did everything you listed.  Herve' helped me get 'er done......

[Guest]

welcome. sry i haven't been on, but once you get it the first time, its all easy stuff...

[daspazz]

No worries!!!