jayblingham Posted January 16, 2011 Share Posted January 16, 2011 I'm on a D620, with Intel graphics, and I've been looking around for the EDP 1.5 RC to download. Can anyone help me? I was able to get everything up and running on the base 10.6.0, but when I upgraded to 10.6.6, the only thing I seemed to lose was my accelerated graphics (didn't try sleep etc..). If 1.5 fixes this, I'll be very happy. I'll only be truly happy though, once I get rid of this Intel wireless card. Thanks in advance. Link to comment Share on other sites More sharing options...
Administrators Leon Posted January 16, 2011 Administrators Share Posted January 16, 2011 On 1/16/2011 at 5:20 PM, jayblingham said: I'm on a D620, with Intel graphics, and I've been looking around for the EDP 1.5 RC to download. Can anyone help me? I was able to get everything up and running on the base 10.6.0, but when I upgraded to 10.6.6, the only thing I seemed to lose was my accelerated graphics (didn't try sleep etc..). If 1.5 fixes this, I'll be very happy. I'll only be truly happy though, once I get rid of this Intel wireless card. Thanks in advance. Hey Jay, Goto the "EDP release forum" https://osxlatitude.com/index.php?/forum/8-releases/ Here you go Link to comment Share on other sites More sharing options...
jayblingham Posted January 16, 2011 Share Posted January 16, 2011 Thanks! Not sure why I couldn't figure that out on my own, but we'll blame it on "weekend mode" Link to comment Share on other sites More sharing options...
jayblingham Posted January 16, 2011 Share Posted January 16, 2011 I've got everything working now on my D620 running OSX 10.6.6! This includes Ethernet, Sound, Accel Intel GMA950, and Sleep/Resume. Next step is to buy a compatible WiFi card from eBay. Thanks to everyone who dedicates time to this effort. It is absolutely appreciated! Regards, Link to comment Share on other sites More sharing options...
abbacadaver Posted January 16, 2011 Share Posted January 16, 2011 On 1/16/2011 at 11:42 AM, Leon said: yep.. try that.. Actually, using -F alone in chameleon booted the OS fine. That was the last thing it occurred me to do. Ignore all kernel flags.. Ugh, I should've tried that a day ago.. *facepalm* Now I guess I'll upgrade to 10.6.6 and install chama 2/edp 1.5 again.. Be back in 2 hrs! (after I'm done dling & installing 10.6.6) Link to comment Share on other sites More sharing options...
abbacadaver Posted January 17, 2011 Share Posted January 17, 2011 Ok I'm back, and now running 10.6.6 to some successful degree. My most immediate concern is getting the built-in ethernet port working, as I have to transfer a few files over wire to an ancient system incapable of wireless. For some reason the ethernet port has worked under a fresh install of iFail 10.6.3, but stopped working after an upgrade to 10.6.4. I'm still looking for a fix for that. Thanks for your help. Link to comment Share on other sites More sharing options...
abbacadaver Posted January 17, 2011 Share Posted January 17, 2011 For the time being I found a quick solution in the form of a USB to ethernet stick (linksys USB200M) I found lying around. No drivers were available for OSX, or at least it couldn't be recognized by the OS. Fortunately some guy made drivers for it. http://www.sustworks.com/site/news_usb_ethernet.html It's a temporary fix that seems to work just fine. Still looking for the built-in eth perm fix Link to comment Share on other sites More sharing options...
Administrators Leon Posted January 17, 2011 Administrators Share Posted January 17, 2011 Hi, I'm sorry, but is a bit hard to support when you are running iFail, since our EDP package is build for a vanillia setup. iFail, might contain changes to the system that is imposebil for us to predict. That said, i had a D520, and while we do include a network kext for that model, its not stable at all.. my solution was also a usb adapter. Link to comment Share on other sites More sharing options...
Recommended Posts