Jump to content

HP Envy 14-1110NR with Mavericks 10.9.2


Jake Lo

Recommended Posts

  • Moderators

Helped a friend install Mavericks on this. It's different from the one in compatibility list as this one doesn't have Sandybridge processor, but the 1st Generaion i5. I got most things working, but I no longer have the laptop. This guide and bootpack should get you up and running, but might need more tweaks for power management.
 
hp_envy_14.jpg
 
Credits:
Special thanks to myHack (conti)
Pokenguyen - Patched DSDT for sleep
Rehabman - Touchpad scrolling
qwerty12 - DisableIntelTurboBoost for Power Management
GhostRaider and everyone mentioned in his guide to get 1st Gen. HD Graphics working as well as it does
 
Specs:
BIOS Insyde F.26 | i5-460M | 8GB Ram | Intel GMA 5700mhd, 1366x768 | Rebranded Dell DW1510 | Mavericks 10.9.2
 
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] [1002:68c1]
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05)
 
What's working:

  • Full QE/CI
  • Keyboard and touchpad
  • Audio 
  • Sleep and Wake with LID
  • Wifi - replaced Intel Card with DW1510 (rebranded)
  • (Whitelist BIOS mod from here) - Use at your own risk
  • SD Card reader
  • LAN
  • Webcam

Not working:

  • Discrete card ATI Radeon 5650m
  • VGA - not tested

Let's get started...
I used the myhack method for this build, so follow instructions to build your USB installer, set BIOS settings and run the OSX Installation from here http://myhack.sojugarden.com/guide/

  • After creating your USB installer, run myHack again
  • Select Install Extra and point to the Extra folder attached (extract it first) Extra.zip
  • Boot up system with USB installer disk with -v
  • Format the HDD per instruction from myHack site (GPT and Journaled)
  • Select "Use my Own" when prompt, point it to the Extra folder in the root of the USB installer drive
  • Delete the 3 files when prompt
  • Restart the computer when finished. Remove the USB installer
  • Boot from the HDD and complete the customization by following the wizard
  • After logging on, in System Preferences:
    •    Enable Clicking for Trackpad
    •    Allow apps downloaded from: Anywhere for Security &Privacy

Note: F11 (Pause) = Brightness, but this keyboard doesn't have ScrolLock key for Dim, so for that I use KeyRemap4MacBook to map F1 and F2 for Dim and Brightness. F5 to enable keyboard light. Insert key turns touchpad on and off.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...