Leonado Posted October 6, 2011 Share Posted October 6, 2011 Hi @ all, I have some problems with my snow leo setup. Bios Patching (nice logo) and Setup to 10.6.0 works, chameleon setup works edp kext etc work ! Lan works after manual setup from kexts.com Now i have finished tools and EDP setup and installed the combo update. (10.6.8) //do i have to run EDP after update and reboot again??) boot worked after 4 stucks. (no kernel panics) just stuck.(no errors) grafik's res is @ 1280x800 everything is smooth ,so works perfect. Sound is not working. serveral errors on startup //soundchip is stac 9228) //Have removed AppleHDA and Voodoo hda to lookup if the errors gone.Yes they gone Deskop stucks after 5 - 10 min. have to powered off by powerbutton. reboot won't work, shutdown won't work! have allready changed the dsdt.aml because dsdt.aml from EDP won't work for me. //Build my own with DSDTSE Is there a way that sound is working with voodoohda and stac 9228? Why stucks the desktop? //no errors found in system log I had read something with ACPI and SSSDT.aml not found on startup. why this error appears? how to wix it? //Edit DSDT.aml and put SSDT in it? May be somebody can help me a little bit or can give me a little hint. //I read something with modyfing voodoohda and stac 9228 , somebody done this ??? Thanks for help and reading sorry for my gramma misstakes Link to comment Share on other sites More sharing options...
Administrators Leon Posted October 7, 2011 Administrators Share Posted October 7, 2011 Hi mate, We had similar results when we were testing with the XPS m1330, our "bugs" where: * Not stable with 10.6.8 - would run fine with 10.6.7 * No Lan * Mobile broadband did NOT work * Wifi had to be replace * Can reboot most of the times * Unable to shut down correct The project was paused because i did not have the time to continue with it - and now i dont have one to test on :-/ Link to comment Share on other sites More sharing options...
Leonado Posted October 7, 2011 Author Share Posted October 7, 2011 So may be i can help to make it stable Does Sound work on 10.6.7 (stac 9228)??? Is it possible to downgrade from 10.6.8 to 10.6.7 ?? Thanks for reply Link to comment Share on other sites More sharing options...
Administrators Leon Posted October 7, 2011 Administrators Share Posted October 7, 2011 Yep.. sound works.. and no. .you can no downgrade... Also, use EDP 1.9.1 - but use your own dsdt if its better The way i usally do testing, is that i have like 2-3 partitions, then using superduper i can clone back and forth... Link to comment Share on other sites More sharing options...
Leonado Posted October 7, 2011 Author Share Posted October 7, 2011 Sounds good. Actually win7 x64 does NOT shutdown ! bluetooth LED and NUM Lock are still on after shutdown! Link to comment Share on other sites More sharing options...
unwesen Posted October 25, 2011 Share Posted October 25, 2011 Sounds good. Actually win7 x64 does NOT shutdown ! bluetooth LED and NUM Lock are still on after shutdown! WIN 7 ULT no probs here. * Not stable with 10.6.8 - would run fine with 10.6.7 Replace AppleACPIPlatform.kext and IOPCIFamily.kext with the one from the netkas page. Exact place later. * No Lan * Wifi had to be replace * Can reboot most of the times * Unable to shut down correct Yes, but lid sleep even deep sleep is working. For shut down hold the power buttom for 10 sec. * Mobile broadband did NOT work Option 380 works fine. Link to comment Share on other sites More sharing options...
Leonado Posted November 5, 2011 Author Share Posted November 5, 2011 Hey guys, After a Short break i try again to Install snow in the m1330! Have somebody the same prob that internal speakers with Voodoohda dont working??? Mic is working, headphones working too. Some ideas???? Cant fix the voodoohda nodes to patch by my own. Think im to stupid for that! Link to comment Share on other sites More sharing options...
Recommended Posts