Charlweed Posted May 28, 2015 Share Posted May 28, 2015 Unless I disable my 2 NVIDIA 8800 GTX cards with the nv_disable=1 option to Clover 3203, my Yosemite 10.10.3 system immediately crashes and reboots after Clover. I am using DVI output. I installed Yosemite 10.10.3 clean on a Gigabyte GA-Z87X-HD3 mobo and a i7-4771 CPU. To run, my kernel options are "-v nv_disable=1 kext-dev-mode=1 slide=0 " It crashes regardless of setting nv_drv=1. I can run this hackintosh with the i7's built-in gfx. I tried installing WebDriver-346.01.02f04, but that did not help. I have not messed around with other KEXTS, clover's config.plist, other config files, or DSDT/SSDT Injection. I have read through the nvidia guide at http://www.rampagedev.com/?page_id=276 but it is not up-to-date. What must I do to get NVIDIA gfx not to crash? Thanks! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 28, 2015 Administrators Share Posted May 28, 2015 RampageDev's guide seems up-to-date enough to me. What do you think is missing? Did you try booting with only 1 card? Link to comment Share on other sites More sharing options...
Charlweed Posted May 29, 2015 Author Share Posted May 29, 2015 RampageDev's guide's references to Clover are obsolete, the config.plist file, and clover-injection stuff has changed from the version in the guides. Also, the direct DSDT/SSDT section needs to be updated, as "DSDT Editor" has been replaced with MaciASL, and the details of it's use are different. But most imprtantly the DSDT content for NVIDIA is so different that the instructions for finding the device code, and pasting in code, do not work.Re: running on one card, both 8800s are old (2006) in a liquid-cooled loop. If I were to remove one card, I may as well replace both with a modern card. That = $$$ Link to comment Share on other sites More sharing options...
Recommended Posts