hottt Posted June 5, 2015 Author Share Posted June 5, 2015 I do not have. Yosemite installed now , but I still have 7mb at graphics card . Link to comment Share on other sites More sharing options...
pauldmps Posted June 13, 2015 Share Posted June 13, 2015 Hi. See my guide here to fix your problem: https://osxlatitude.com/index.php?/topic/8118-guide-lenovo-z50-70/ You need to use ig-platform-id as 0x0a260000 instead of 0x0a260006 1 Link to comment Share on other sites More sharing options...
Gaivals Posted July 17, 2015 Share Posted July 17, 2015 Hello. I have the same laptop with i7 4510u. I installed using pauldmps guide, but intel hd4400 shows only 3mb and system is very slow. What could be the solution? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 18, 2015 Moderators Share Posted July 18, 2015 If you have followed his guide thoroughly, you should have full QE/CI. Perhaps you have missed a step or 2. Upload your Clover folder... Link to comment Share on other sites More sharing options...
pauldmps Posted July 18, 2015 Share Posted July 18, 2015 Try different ig-platform-id as you have a different processor. Link to comment Share on other sites More sharing options...
chumdoggin Posted August 8, 2015 Share Posted August 8, 2015 Hi there.. I have one of these but it does not have the nvidia. I followed your guide, pauldmps and most is working good but the snags left now are only sleep issues and in about this mac its reads 2.39 ghz instead of 1.7 which is what the processor is i5 4210u, I believe. Otherwise all is good. brightness keys! used it for my other lenovo too. sound good and I have a wifi card coming for it. The bios was a breeze to get the advanced menu unlocked to my amazement! Thank you so much for the guide. Do you have any suggestions for the sleep and processor? I had the pm script generate the 5th ssdt as I had 4 instead of 5 probably since there is no nvidia. edit: guide said no genericusb but was trying for the sleep not working.. also missing sleep slider in energy saver control panel. config.plist.zip DSDT.zip SSDT-4.aml.zip Link to comment Share on other sites More sharing options...
chumdoggin Posted August 10, 2015 Share Posted August 10, 2015 Sleep was fixed with an additional usb patch. Another patch enabled lid sleep, and inputing 1700 into the mhz field in clover config.plist fixed the processor reading. there was another lid patch which included a kext that may enable lid wake as well but have not got it to work. Link to comment Share on other sites More sharing options...
pauldmps Posted August 21, 2015 Share Posted August 21, 2015 ^^ Kindly post those patches for everyone of us. Link to comment Share on other sites More sharing options...
pvineeth1997 Posted September 1, 2015 Share Posted September 1, 2015 I get PARSEOP_SCOPE,expecting $end and premature END-Of-File error in SSDT-5.dsl. Error Line: Scope(\_SB.PCI0.RP05) { ...... } How to fix this? ------------------------------- Specs: Intel i7-4510u Link to comment Share on other sites More sharing options...
pauldmps Posted September 1, 2015 Share Posted September 1, 2015 Your DSDT was not disassembled properly! Use MaciASL for DSDT disassembly and edits. Link to comment Share on other sites More sharing options...
Recommended Posts