loibi93 Posted July 10, 2015 Share Posted July 10, 2015 Hello everyone ! I have updated from 10.10.1 to 10.10.4 today, and it went quite smoothly. After fixing the kernel, the System booted, and as expected the Graphics were not working yet. So i installed the patched Azul Framebuffer kext with Kext Utility and restarted, but i still didn't have good Graphics. It worked fine before the update, and the only thing that changed is the framebuffer kext which i reinstalled (i took it from this forum from the dell latitude tutorial). Has anyone an idea why it is not working ? I use clover, the config file is attached ! The HD4400 is injected in DSDT ! with best regards config.plist.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 10, 2015 Moderators Share Posted July 10, 2015 Patching the kernel for Haswell defeats one of the benefits of Clover. There's an option to do that on the fly which I enabled, but you need to restore the vanilla kernel. You can download it here if you have don't have a backup. I also enabled the graphics but you'll need to restore the vanilla AzulFB too and install this to /S/L/E. config.plist.zip Link to comment Share on other sites More sharing options...
loibi93 Posted July 10, 2015 Author Share Posted July 10, 2015 Do you have the vanilla Framebuffer ? I don't have it anymore ! with best regards EDIT: Works with patched framebuffer, so thanks very much ! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 10, 2015 Moderators Share Posted July 10, 2015 Here you go. Try with vanilla kext and see if you still have QE/CI AppleIntelFramebufferAzul.kext.zip Link to comment Share on other sites More sharing options...
loibi93 Posted July 10, 2015 Author Share Posted July 10, 2015 If i use the vanilla Framebuffer, will this break my DisplayPort ? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 10, 2015 Moderators Share Posted July 10, 2015 No, the patch is added in the config file. DP and HDMI both should work. Link to comment Share on other sites More sharing options...
loibi93 Posted September 28, 2015 Author Share Posted September 28, 2015 Hello ! I was having issues with my edimax ew-7811un USB Wlan Dongle for quite some time now, but i noticed that it was fine sometimes, but today i finally found the reason why it is not working sometimes. Whenever i plug in a Monitor (DisplayPort) i get much lower Internet speeds and Connection Issues ! Does anyone have a clue why that could be ? If i use this stick with another OS i don't have these Problems ! Does anyone know why this could be ? UPDATE:Ok, I also get these issues when not connected to a monitor, maybe there is something wrong with my USB Drivers ? Link to comment Share on other sites More sharing options...
Recommended Posts