Jump to content

Installation of Mavericks on HP 630


kelvinLight

Recommended Posts

Please I want to know if there is any version of mavericks that can run on my hp2000 !. if so please help me. I haven't hack before I'm still a novice about anything hack .I will be happy

to see my need in progress .

please i need guides from the preparation of flash to the end of the installation ..

I heard about MYHACK ,chameleon , etc . but i didn't know there works . please ! don't pass me by. I realy need your help!

My system specifications are blow:

 

HP 2000

Intel Pentium B950 processor -

2.10GHz 32bits HD 750, 6gb ram . Thanks in advance !

Link to comment
Share on other sites

  • Administrators

If you could post better specs, we might be able to give suitable advice.

 

Intel Pentium B950 appears to be a 64bit CPU, so that's Ok for Mavericks (or any Lion, ML or Yosemite installation to that effect).

http://ark.intel.com/fr/products/55627/Intel-Pentium-Processor-B950-2M-Cache-2_10-GHz

 

The CPU also appears to have Intel HD graphics, though I can't say if that is 1st gen Intel HD or not. Assuming it's 1st gen Intel HD like in Arrandale (1st Gen "i" Core CPUs), full graphics support will entirely depends on the cable connector (LVDS vs. eDP). Have a look at the excellent 1st gen. Intel HD graphics thread at InsanelyMac.

 

For the rest, you need to read up on general Hackintoshing matters, from USB installer creation to actual installation. In your case, I'd recommend you use the recommended myHack-based method, as documented in our EDP pages (click in EDP button at top of forum/web page).

Link to comment
Share on other sites

please check if this can serve I got it from the system command prompt.

 

System Manufacturer: Hewlett-Packard System Model: Presario CQ57 Notebook PC BIOS: InsydeH2O Version 03.60.50F.33 Processor: Intel® Celeron® CPU B800 @ 1.50GHz (2 CPUs), ~1.5GHz Memory: 5120MB RAM Available OS Memory: 2670MB RAM Page File: 925MB used, 4412MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Intel® HD Graphics Manufacturer: Intel Corporation Chip type: Intel® HD Graphics Family DAC type: Internal Device Key: Enum\PCI\VEN_8086&DEV_0106&SUBSYS_3672103C&REV_09 Display Memory: 1206 MB Dedicated Memory: 128 MB Shared Memory: 1078 MB Current Mode: 1366 x 768 (32 bit) (60Hz) Monitor Name: Generic PnP Monitor Monitor Model: unknown Monitor Id: LGD02F2 Native Mode: 1366 x 768(p) (60.031Hz) Output Type: Internal Driver Name: igdumd32.dll,igd10umd32.dll,igd10umd32.dll Driver File Version: 9.17.0010.4101 (English) Driver Version: 9.17.10.4101 DDI Version: 10.1 Driver Model: WDDM 1.1 Driver Attributes: Final Retail Driver Date/Size: 1/30/2015 14:21:46, 11117808 bytes WHQL Logo'd: Yes WHQL Date Stamp: Device Identifier: {D7B78E66-4246-11CF-8963-7816B7C2C435} Vendor ID: 0x8086 Device ID: 0x0106 SubSys ID: 0x3672103C Revision ID: 0x0009 Driver Strong

Link to comment
Share on other sites

  • Administrators

Visit HP's web site, enter your model n° + serial n° and you should be able to retrieve your exact specs. You could also use the little app called CPUZ or any other available tool that can provide full system specs in understandable and readable terms. Because the above really is kind of... unusable.

Link to comment
Share on other sites

×
×
  • Create New...