mlacerda Posted September 23, 2015 Share Posted September 23, 2015 After many days of hard work , the video card on my laptop is still not working. My laptop is a Dell Inspirion 5548 My spec: Intel® Core™ i7-5500U Memory 16GB, Dual Channel, DDR3L, 1600 MHz (2x8GB) HDD 1TB, SSHD VGA AMD Radeon™ HD R7 M265 2GB Screen LED IPS FHD 15.6 (1920x1080) Touch Intel Wireless 7265 802.11ac + I'm using El Capitan in dualboot (Clover) with Windows 10 and In windows the video card is normally recognized. I know it's not possible to disable the onboard video card this processor then I think the best option would be to operate the Intel HD 5500 on OSX but this also is not working. When I set InjectionIntel=Yes on Clover the OSX does not boot. I have attached to this post some pictures with the problems im facing. Someone can give me some help? tks config.txt Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 24, 2015 Moderators Share Posted September 24, 2015 You need to set the DVMT pre-allocated memory in BIOS settings to 96MB. If your BIOS is locked, then you'll need to patch the FB to pass the Stolen Memory assertion. It's already in your Config file, it just needs to be enabled. I set InjectIntel = True and ig-platform-id=0x16260006 and enable the FB patch. Hope this helps. config.plist.zip Link to comment Share on other sites More sharing options...
mlacerda Posted September 24, 2015 Author Share Posted September 24, 2015 In Windows I have the configuration shown in the attached image. I need to do any more configuration in the BIOS? How do I enable the FB patch? The flag "InjectIntel" is set to false because when this is true a reboot in system load occurs. Thanks for the answer Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 24, 2015 Moderators Share Posted September 24, 2015 I already did in the config attached above. Have you tested it? Can't see image clearly, too small. Link to comment Share on other sites More sharing options...
mlacerda Posted September 24, 2015 Author Share Posted September 24, 2015 I re sent the image. In fact it was small I tested now with the setting made ​​by you and recognized the intel 5500 but the image is shaking. I'm excited! Finally it seems that we are on track Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 25, 2015 Moderators Share Posted September 25, 2015 Ok. Maybe switch ig-platform-ip back to 0x16160002 or play with different value to see which works better. For me it's 0x16260006 Link to comment Share on other sites More sharing options...
mlacerda Posted September 25, 2015 Author Share Posted September 25, 2015 It worked Thank you so much!!! The challenge now is to operate the USB Wifi Ralink!! Tks again Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 25, 2015 Moderators Share Posted September 25, 2015 Why not just replace the internal wireless card? Works way better. Go to Dell and order it if you're in the US, DW1560 NGFF M.2. roughly $20 with shipping. Make sure it supports the M.2 NGFF cards first Link to comment Share on other sites More sharing options...
mlacerda Posted September 29, 2015 Author Share Posted September 29, 2015 Unfortunately I am in Brazil and here is not very cheap I did the installation of EDUP but the connection drops all the time. The worst thing is that when disconnected , can not re-connect only after rebooting the machine . As soon as I turn on the machine, the connection is maintained for about 5 minutes .. and then falls.I researched a lot .. and found comments that could be due to the WPA or encryption, however, even with the open network connection remains. Funny thing is that on other networks I do not have this problem .. only wifi network in my house. I've tried all formats and encryption nothing. On windows works perfectly this same card on the same network. Any suggestion? Link to comment Share on other sites More sharing options...
arhu Posted October 23, 2015 Share Posted October 23, 2015 I have got the same notebook (the same without cpu, i have i5-5200u), I used your config.plist, loaded FakeSMC.kext and i have got kernel panic. Link to comment Share on other sites More sharing options...
Recommended Posts