krzysztofc10 Posted February 26, 2016 Author Share Posted February 26, 2016 Ok I will change those things thanks for advice ! Link to comment Share on other sites More sharing options...
krzysztofc10 Posted February 26, 2016 Author Share Posted February 26, 2016 The Acpiplatform.kext that I've used was the cause of not succesful restartarting and shutting down the system. So I go back to the original one and have no sound.. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 26, 2016 Administrators Share Posted February 26, 2016 No sound but you can start and shutdown your laptop now? I'd call this progress. Audio we can fix easily in due course. It's totally secondary. Thanks for the IOReg. I can see your nVidia GPU as device VID under device PEG3@3. You probably already have full graphics acceleration for your NVS 3100M (i.e. it works OOB), but I can patch it for cosmetic reasons (like display "nVidia NVS Quadro 3100M" instead of "Dell NVS 3100M) and make the LCD screen internal. Your built-in screen appears as AppleDisplay, not AppleBacklightDisplay so I guess About thisMac->Displays tab shows an external screen picture instead of a laptop built-in LCD. Can you confirm? if you have an HDMI output, it should work OOB (2nd nVidia output port shows HDMI connector type). I'd be interested to hear if you see proper GPU throttling in HWMonitor app, especially after sleep. If you do not, AGPM tuning would probably fix that and provide you with much better GPU performance, better T° and better battery savings. I see your Broadcom wireless card as device PXSX under RP02@1C,1. Presumably a DW1510. Link to comment Share on other sites More sharing options...
krzysztofc10 Posted February 26, 2016 Author Share Posted February 26, 2016 I've check it one more time restart is now fixed. Shutdown and audio not working Link to comment Share on other sites More sharing options...
krzysztofc10 Posted February 26, 2016 Author Share Posted February 26, 2016 Yes it show as external screen picture And yes I'm using DW1510, I had DW1520 but it wasn't working. And no my GPU is working at 405MHz Core and Memory. SMC compatible I must set to smc-mcp? But what binary key I must use for this card .. ? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 26, 2016 Administrators Share Posted February 26, 2016 Your SysProfiler shows that you're using MBP6,2 SMBIOS (which is Ok) and SMC version 1.58f17 (also Ok). I'm pretty sure your FakeSMC is therefore Ok but I'll check it out. I'll also inject an AGPM section to your FakeSMC to target your NVS 3100M GPU (ven/dev id 10de/0a6c). I'll reuse the same parameters as I did for nVidia NVS 135M of the D630/D830 series or NVS 160M of E6400/6500 series. It may turn out not fully optimum and may require further tuning but will nevertheless hopefully provide you with proper GPU throttling. Full explanations are available here. Edit: on checking your provided FakeSMC, no it's not tuned at all! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 26, 2016 Administrators Share Posted February 26, 2016 Try this. FakeSMC_package_E6510_NVS-3100M.zip Link to comment Share on other sites More sharing options...
krzysztofc10 Posted February 26, 2016 Author Share Posted February 26, 2016 Nope still 405MHz both. But CPU is working to 1.58GHz instead 1.60 GHz. In one sec was 1.72GHz on every core but it doesn't show again so it can be bug. In AGPM plist - MacbookPro 6,2 I have changed Vendor10deDevice0a29 to Vendor10deDevice0a6c and also nothing changed. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 26, 2016 Administrators Share Posted February 26, 2016 Did you remove NullCPUPM and enable P States + C states in the Clover config? Regarding CPU speed, it's perfectly Ok to see 1.58GHz for a 1.6GHz nominal speed. Nothing to worry about, there's no bug here. Clover allows you to rectify this by specifying a nominal FSB bus speed in the CPU config menu/section. Lookup your exact CPU model and you'll find out the associated bus speed. Then, specify that (in KHz) in the Clover config. You do not need to modify AGPM kext in /S/L/E, the FakeSMC kext already contains the necessary patch. Link to comment Share on other sites More sharing options...
krzysztofc10 Posted February 27, 2016 Author Share Posted February 27, 2016 My CPU have Front Side Bus - 2500Mhz. Yes I Had removed it, and notice that my CPU is working fine after that. When I have NullCPUPM my CPU was working at 1.72 per core Ok So I had set 625 000KHz Bus speed and notice that my CPU is working at 1.60 GHz/ Ok it drops down DSDT, sound and Gpu left Link to comment Share on other sites More sharing options...
Recommended Posts