terminator96 Posted November 13, 2016 Share Posted November 13, 2016 HP Pavilion G6 2303tx intel core i5 3230m @ 2.6GHz (2cores / 4 threads) intel HD 4000 (96 mb of VRAM? OSX verbose booting shows "96 mb (64/32 split)" ) Radeon HD7670m, 1 GB VRAM ( Config "Pondweed", 3 ports ) 10 GB RAM (2GB+8GB) Realtek NIC RaLink RT3290 wifi/bluetooth module I can get OSX (10.8.2) to boot using Clover. Keyboard and trackpad are enabled via "VoodooPS2" drivers. Network is enabled via official Realtek 8101E drivers. Booting with clover gives me native 1366x768 resolution, and system profiler shows Radeon graphics, and a generic display. I don't get accelerated graphics. Audio, doesn't work as of now, I don't really care about it. I'd like to be able to boot without the "cpus=1" flag (I'd like full performance), and I'd like to have graphics acceleration. Without QE/CI, the system is essentially useless to me. (Basic requirement is to run iWork suite). System dump attached (instructions followed from this link : http://www.osxlatitude.com/edp/documentation/, ran on Ubuntu) sysdump.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 13, 2016 Moderators Share Posted November 13, 2016 Upload the Clover folder you currently use Link to comment Share on other sites More sharing options...
terminator96 Posted November 13, 2016 Author Share Posted November 13, 2016 Does it help if I say its the default clover folder when clover is installed from this link -> https://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded)/files/latest/download ? I have to swap hard drives to switch between my daily driver (Ubuntu / Windows dual boot) and OSX on the laptop. If you still want my clover folder, I can give that in a couple hours. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 13, 2016 Moderators Share Posted November 13, 2016 Default clover setting from just installing Clover Loader will not get your system to boot. You must've have some other setting. That's ok. I should be able to duplicate with the settings you mentioned in the 1st post. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 13, 2016 Moderators Share Posted November 13, 2016 try replacing with these files HP Pavilion.zip Link to comment Share on other sites More sharing options...
terminator96 Posted November 13, 2016 Author Share Posted November 13, 2016 Thanks so much!Got graphics acceleration on. Although it only shows Intel HD. Doesn't show radeon at all in the system profiler. Was that the intended behaviour?I now have everything except audio, WiFi, and USB 3.0 working (I think).Edit : USB 3.0 works only for USB 3.0 hardware. Edit 2 : Audio works using VoodooHDA (2.8.9)Sent from my Moto G 2014 using Tapatalk Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 13, 2016 Moderators Share Posted November 13, 2016 Yes, the Radeon is disabled through DSDT patching to extend battery life. Try adding FakePCIID_XHCIMux.kext and FakePCIID.kext from Rehabman's GitHub. Not sure what Audio codec you have, there might be a patched AppleHDA already created. Launch DPCIManager.app to check while you have voodooHDA running. Link to comment Share on other sites More sharing options...
terminator96 Posted November 16, 2016 Author Share Posted November 16, 2016 Added FakePCIID_XHCIMux.kext and FakePCIID.kext . All USB ports work as advertised now. App screenshot uploaded as attachment. Also, if possible, can I enable Radeon? Battery is not an issue for me (my laptop is always plugged in, battery is very old, doesn't hold charge anymore). Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 16, 2016 Moderators Share Posted November 16, 2016 No guarantee, but try this. Backup the files first. Replace SSDT-4.aml and Config with attached. * Sleep may break and wakeup with black screen. HD7670M.zip Link to comment Share on other sites More sharing options...
terminator96 Posted November 17, 2016 Author Share Posted November 17, 2016 I'll try this out in a while. Also, if I downloaded the 10.8.5 download from here : http://www.insanelymac.com/forum/files/download/312-idt-92hd87b24-111d76d9/, how do I proceed? Edit : adding your attached files to efi volume breaks clover. And for the audio package linked in the post, it came with an installation package, but it breaks sound. (No audio as opposed to low volume audio) Link to comment Share on other sites More sharing options...
Recommended Posts