highvoltage12v Posted July 26, 2017 Share Posted July 26, 2017 I am having issues booting the Sierra installer, it will timeout with the no boot symbol. I changed my bios settings to reflect the e7x70 guide and changed my DVMT to 64mb as there isn't a 96mb option in the PE32 section. My Specs are: i5-6440HQ 8gb DDR4 ram 500gb Sata SSD 14" non touch FHD screen e5480 files.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 26, 2017 Moderators Share Posted July 26, 2017 Please include the BIOS version Attach your Clover folder for review Link to comment Share on other sites More sharing options...
highvoltage12v Posted July 26, 2017 Author Share Posted July 26, 2017 Bios version is 1.5.2. CLOVER.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 27, 2017 Moderators Share Posted July 27, 2017 Give this bootpack a try. Link to comment Share on other sites More sharing options...
highvoltage12v Posted July 27, 2017 Author Share Posted July 27, 2017 Hi, thank you for the boot pack, now It will startup in verbose mode and hang at the Apple progress bar screen following it. Link to comment Share on other sites More sharing options...
highvoltage12v Posted July 27, 2017 Author Share Posted July 27, 2017 in regular boot and safe boot it ends with the same results, is this related to the 6440hq? Link to comment Share on other sites More sharing options...
highvoltage12v Posted July 27, 2017 Author Share Posted July 27, 2017 I been able to get it to boot by moving Clover to a new USB drive. The only major issue I have now is getting Voodoo I2C to work. Im having issues patching my DSDT with INT3442/INT3443. I'm able to load the kext within the OS and have trackpad and scrolling but no keyboard and KP on reboot. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 27, 2017 Moderators Share Posted July 27, 2017 Try , rename to DSDT.aml Update: Make a mistake on the i2c patching. Uploaded new file DSDT-I2C.aml.zip Link to comment Share on other sites More sharing options...
highvoltage12v Posted July 27, 2017 Author Share Posted July 27, 2017 Hello, You originally had 2 files posted, I tested both. File Ic2c allows me to boot without panic, however I have no trackpad or keyboard, during boot Voodoo I2c recognizes the devices but "failed to read ACPI config". File Ic2B will result in the same kernel panic. Thanks for your help. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 27, 2017 Moderators Share Posted July 27, 2017 Ok, so the 1st DSDT was working? Ok I'll restore that version. For the touchpad, try removing these kexts AppleIntelLpssI2C.kext, AppleIntelLpssI2CController.kext andAppleHPM.kext Link to comment Share on other sites More sharing options...
Recommended Posts