withoutname

just enable uefi, with secure boot off, then apply and exit. after the laptop restarts itself, push F12 button, to enter custom boot selection menu. and the you have to choose uefi:your_usb_identifier option to boot from

I wonder that how I could miss this naming...

After I renamed the dsdt_a19 to dsdt, everything started working! Now every USB ports, even the sound card started working!

THANKS EVERYONE AGAIN!!!

I hope i did everything good...

Here is my debug log: 

I will try it soon, thanks!

50 minutes ago, galab said:

Here is my USBPort.kext

@AjAlberto

Don't forget to use Hervé's DSDT - https://osxlatitude.com/applications/core/interface/file/attachment.php?id=18365

 

USBPorts.kext.zip

Thanks! Will give it a try!

UPDATE: no luck, still the same, my usb ports are not working.

you mean my EFI folder?

I only have one problem, Hackintool says I have unknown controller. my usb controller vendor ID is: 0x8086 and the device ID is 0x1E2D.

It says usbinjectall is loaded, but when I try to do the things described in manual, nothing happens.

8 hours ago, scram69 said:

galab,

Since you successfully completed all 19 steps of the Hackintool guide for USBPorts.kext, I hope you might be able to answer a few questions:

-Step 1 describes the action "Clover Rename..." How exactly does someone "Clover Rename..." something?

-Step 8 says to "Change the HS01,HS02 ports to the ones you have your mouse and keyboard attached".  Does this mean an external keyboard and mouse is required for this step?  For all steps?

-Step 12 describes plugging and unplugging a "TypeC device".  Could you give us an example of a "TypeC device"?

 

Thanks for any help-

Clover renaming means in clover configurator you have an option for that.

the whole guide is universal which means not for only dell notebooks, it works for any type of device which can run osx. Tpyec device means if your machine also have typec usb with the normal usb-s, you should do the same plug/unplig procedure with it.

can somebody help me to get working audio and USB ports? Now the only one working usb2.0 port is busy with the wifi adapter.

Yup, now i have installed it successfully! Next is get to work my wn723v3 adapter

Now I'm browsing my almost perfect Mojave install.

Can somebody help me to get working usb3 ports and mic?

Now im trying deattached everything, removed drive from bay, only the hdd is in. This time i saw a message before the installer started unsupported cpu and unsupported pch. 

I have BIOS A20(i have tried with A21 also) i7 3520m 2.9 GHz, intel HD4000 VGA @ 1366x768 res, no dedicated VGA, 8+4 GB DDR3. and installer is mojave 10.14.0. and trying to install it onto HDD not SSD.

And i use the dell-s docking station.

I also have e6330 but with i7 3520m cpu.

i have downloaded the zip file from first post, as Semaj described in the manual, but nothing works. Booting from my thumb drive, and installer stuck at apple logo with about 75% loading bar under it.

UPDATE: installer started working, now it installs but after booting again into the installer, about 95% it writes on the calculating remaining time, and nothing happens after about an hour...

Any advice?