sO_omuch

Its not working as well. It sleeps but reboots when trying to wake feom sleep. Do we have a fix for that?

That worked! Thanks much for your support. I guess this issue has been resolved now.

Removed all ssd's, USBPorts.kext and all voodoo.*kexts but still my Wiireless USB won't work. Used old EFI (the one with audio not working) removed unwanted kexts and ssdt's and ticked FixHPET from ACPI. Reboot and audio starts working with Wireless USB working as well. Can you please help me fix the Catalina Clover Theme instead? Icons and mouse cursor become big. Tried changing screen resolution but no effect. Thanks @Jake Lo EFI.zip

Tried using Mac mini 8.1 and use layout-id=11, 3, 15, 27 but all failed (shows audio was disabled/greyed) Got Audio working using this config.plist but my Wireless USB TL-WN823N stops working. iMac.zip config.plist.zip

Hi, Installed Cat.10.15.4 on my Optiplex 7070 but can't make audio work. Audio Controller : RealTek ALC3234 as shown on BIOS @Jake Loneed your help on this again. Thanks! debug_15827.zip MacMini.ioreg

Issues has been solved. Will try tonread more regarding DSDT patching. But my hackintosh is perfectly running at the moment.

Got HDMI port working with the help of Hackintool using my working config.plist with values from attached screenshot. Tested HDMI audio as well and its working fine. I guess this solves my HDMI port issue. Thank you very much @Jake Lo for having so much patience in helping me fix this issue. MacBook Pro.ioreg

Tried this and Laptop crashes as soon as I connect the HDMI cable. Attached debug with IOReg. debug_5050.zip

I've read some guides about Hackintool patching as well but I can't get this same part where you should see a red highlighted index from the connectors tab. Attached screenshot and current IOReg while HDMI Cable is connected using my working config.plist MacBook Pro.ioreg

Yes it is working on windows using the same HDMI cable and monitor.

No luck with this one either. I wonder why it's this hard to make this HDMI port work. Checked on Windows and it shows HDMI was connected to Intel UHD 620. MacBook Pro(WhiskeyLake).ioreg

That did not work as well MacBook Pro.ioreg

Tried this one as well and its still same. Attached new IOReg with HDMI connected. **using the nonDSDT EFI MacBook Pro.ioreg

Just tried it but still same issue. Attached IOReg with HDMI-HDMI cable connected using your config.plist **using the nonDSDT EFI MacBook Pro.ioreg

Here you go Thanks! MacBook Pro.ioreg

I'm using HDMI to HDMI cable @Jake Lo

Hi, Please help me get HDMI out and HDMI audio to work with my Latitude 5400. -Intel Core i7-8 665U Processor (4 Core,8MB Cac he,1.9GHz,15W, vPro-Capable) -32GB, 2x16GB, DDR4 Non-ECC -Intel Core i7-8665U Processor with Integrated Intel UHD 620 Graphics, Thunderbolt Attached 2 debug files. 2nd one is DSDT patched but with few issues (HDMI, Battery Status) @Jake Lo please help Thanks! debug_16248.zip DSDTdebug_12298.zip

If I'm not mistaken, I think you need to delete dsdt.aml

Thank you for fixing the config.plist @Jake Lo. Tried it and it works. Now I can try to fix the iMessage and Facetime.

@juntaiii I used your above EFI to install Catalina 10.15.4 on my Latitude 5400 and everything works fine (i think). The thing is I need to edit the config.plist to try to make the iMessage and Facetime work. Upon loading the config.plist on clover configurator its an error message on line 1 and goes directly to text tab to edit. So I edited and removed the ` on line 1 then try to follow the instructions to make the iMessage and Facetime work from the FAQ. BUT when i reboot, its not booting anymore. Can you please help me make this work? I'm new in hackintoshing so my knowledge is limited at the moment. Asking for help as well from @Jake Lo if possible.

Hello! I've successfully installed Catalina 10.15.4 on my Latitude 5400 with below specs 8th Generation Intel Core i7-8 665U Processor (4 Core,8MB Cac he,1.9GHz,15W, vPro-Capable) Integrated Intel UHD 620 Graphics, Thunderbolt 32GB, 2x16GB, DDR4 Non-ECC M.2 512GB PCIe NVMe Class 35 Solid State Drive and replaced the AX200 Wireless card with DW1560 BCM94352Z I've put all kexts to /L/E using Hackintool and kept a copy of FakeSMC.kext on /E/C/K/O at first the Bluetooth is working but after reboot it stopped working (can't turn it on) Thank you in advance for helping. **update Did a reinstallation using attached kexts and kept below kexts in /E/C/K/O. BT and WiFi works fine AirportBrcmFixup.kext BrcmFirmwareData.kext BrcmBluetoothInjector.kext BrcmPatchRAM3.kex ***I still need help in patching my DSDT

I think this topic can be closed now as the trackpad buttons not working is a common issue. My Latitude 5400 is currently working fine except for the BT is not working at the moment. Will try mo monitor if BT will be working after a few reboots.

Did a reinstallation, found out that trackpad buttons stopped working after putting any kexts in /L/E (used hackintool, did rebuild/repair kext then reboot) Even deleting the installed kexts did not return the functionality of trackpad buttons.

Hello! Installed Catalina 10.15.4 on my Latitude 5400 i7-8665U with UHD 620 Graphics after installation trackpad and right/left click are working fine. Installed clover and copied EFI then reboot, after reboot trackpad is not working. and I've also got a DW1560 wifi adapter, WiFi is working but I can't make the BT working. copied below kexts to /L/E using hackintool BrcmBluetoothInjector.kext BrcmFirmwareRepo.kext BrcmPatchRAM3.kext Please help. EFI folder attached. EFI.zip

All issues have been solved! Thanks @Hervé for your very nice guide and advice on reading , @Jake Lo for the DW1560 kext for WiFi and BT. Now I have my own working Hackintosh